[PATCH 5/6] riscv: dts: spacemit: enable USB2.0 controllers on BananaPi F3

[Junzhong Pan]

On BananaPi F3, usb2_0 is connected to a Type-C connector at device
mode by default. This port have no VBUS supply capability, thus host
mode only works with self-powered device or hub. User could switch the
role in sysfs.

And the usb2_1 is connected to the USB2.0 pins of the Mini PCIe slot to
support cellular modules.

Signed-off-by: Junzhong Pan <panjunzhong at linux.spacemit.com>
---
 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index 72f77e9edd63..fd0f96262009 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -350,6 +350,22 @@ &uart0 {
 	status = "okay";
 };
 
+&usbphy0 {
+	status = "okay";
+};
+
+&usb2_0 {
+	status = "okay";
+};
+
+&usbphy1 {
+	status = "okay";
+};
+
+&usb2_1 {
+	status = "okay";
+};
+
 &usbphy2 {
 	status = "okay";
 };

-- 
2.34.1