[PATCH v4 2/8] clk: starfive: Add system-0 domain PLL clock driver
Brian Masney
bmasney at redhat.com
Mon Aug 10 13:23:23 PDT 2026
Hi Changhuang,
On Sat, Aug 08, 2026 at 06:50:48PM -0700, Changhuang Liang wrote:
> Add system-0 domain PLL clock driver for StarFive JHB100 SoC.
>
> Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
> ---
> drivers/clk/starfive/Kconfig | 8 +
> drivers/clk/starfive/Makefile | 1 +
> .../clk/starfive/clk-starfive-jhb100-pll.c | 535 ++++++++++++++++++
> 3 files changed, 544 insertions(+)
> create mode 100644 drivers/clk/starfive/clk-starfive-jhb100-pll.c
>
> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
> index 852464949334..a39dd22112fa 100644
> --- a/drivers/clk/starfive/Kconfig
> +++ b/drivers/clk/starfive/Kconfig
> @@ -117,6 +117,14 @@ config CLK_STARFIVE_JHB100_PER3
> Say yes here to support the peripheral-3 clock controller
> on the StarFive JHB100 SoC.
>
> +config CLK_STARFIVE_JHB100_PLL
> + bool "StarFive JHB100 PLL clock support"
Can this be a tristate?
> + depends on ARCH_STARFIVE || COMPILE_TEST
> + default ARCH_STARFIVE
> + help
> + Say yes here to support the PLL clock controller on the
> + StarFive JHB100 SoC.
> +
> config CLK_STARFIVE_JHB100_SYS0
> bool "StarFive JHB100 system-0 clock support"
> depends on ARCH_STARFIVE || COMPILE_TEST
> diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
> index f00690f0cdad..547a8c170728 100644
> --- a/drivers/clk/starfive/Makefile
> +++ b/drivers/clk/starfive/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_CLK_STARFIVE_JHB100_PER0) += clk-starfive-jhb100-per0.o
> obj-$(CONFIG_CLK_STARFIVE_JHB100_PER1) += clk-starfive-jhb100-per1.o
> obj-$(CONFIG_CLK_STARFIVE_JHB100_PER2) += clk-starfive-jhb100-per2.o
> obj-$(CONFIG_CLK_STARFIVE_JHB100_PER3) += clk-starfive-jhb100-per3.o
> +obj-$(CONFIG_CLK_STARFIVE_JHB100_PLL) += clk-starfive-jhb100-pll.o
> obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS0) += clk-starfive-jhb100-sys0.o
> obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS1) += clk-starfive-jhb100-sys1.o
> obj-$(CONFIG_CLK_STARFIVE_JHB100_SYS2) += clk-starfive-jhb100-sys2.o
> diff --git a/drivers/clk/starfive/clk-starfive-jhb100-pll.c b/drivers/clk/starfive/clk-starfive-jhb100-pll.c
> new file mode 100644
> index 000000000000..55d589bc831e
> --- /dev/null
> +++ b/drivers/clk/starfive/clk-starfive-jhb100-pll.c
> @@ -0,0 +1,535 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * StarFive JHB100 PLL Clock Generator Driver
> + *
> + * Copyright (C) 2024 StarFive Technology Co., Ltd.
> + *
> + * Author: Changhuang Liang <changhuang.liang at starfivetech.com>
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/clk-provider.h>
> +#include <linux/debugfs.h>
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/math64.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/units.h>
> +
> +#include <dt-bindings/clock/starfive,jhb100-crg.h>
> +
> +/* this driver expects a 25MHz input frequency from the oscillator */
> +#define JHB100_PLL_OSC_RATE (25 * HZ_PER_MHZ)
> +
> +/* System-0 domain PLL */
> +#define JHB100_PLL2_OFFSET 0x00
> +#define JHB100_PLL3_OFFSET 0x0c
> +#define JHB100_PLL4_OFFSET 0x18
> +#define JHB100_PLL5_OFFSET 0x24
> +
> +#define JHB100_PLL_CFG0_OFFSET 0x0
> +#define JHB100_PLL_CFG1_OFFSET 0x4
> +#define JHB100_PLL_CFG2_OFFSET 0x8
> +
> +#define JHB100_PLLX_CFG0(offset) ((offset) + JHB100_PLL_CFG0_OFFSET)
> +/* fbdiv value should be 16 to 4095 */
> +#define JHB100_PLL_FBDIV GENMASK(13, 2)
> +#define JHB100_PLL_FBDIV_SHIFT 2
> +#define JHB100_PLL_FOUTPOSTDIV_EN BIT(14)
> +#define JHB100_PLL_FOUTPOSTDIV_EN_SHIFT 14
> +#define JHB100_PLL_FOUTVCOP_EN BIT(16)
> +#define JHB100_PLL_FOUTVCOP_EN_SHIFT 16
> +
> +#define JHB100_PLLX_CFG1(offset) ((offset) + JHB100_PLL_CFG1_OFFSET)
> +/* frac value should be decimals multiplied by 2^24 */
> +#define JHB100_PLL_FRAC GENMASK(23, 0)
> +#define JHB100_PLL_FRAC_SHIFT 0
> +#define JHB100_PLL_LOCK BIT(24)
> +#define JHB100_PLL_LOCK_SHIFT 24
> +
> +#define JHB100_PLLX_CFG2(offset) ((offset) + JHB100_PLL_CFG2_OFFSET)
> +#define JHB100_PLL_PD BIT(13)
> +#define JHB100_PLL_PD_SHIFT 13
> +#define JHB100_PLL_POSTDIV GENMASK(15, 14)
> +#define JHB100_PLL_POSTDIV_SHIFT 14
> +#define JHB100_PLL_REFDIV GENMASK(23, 18)
> +#define JHB100_PLL_REFDIV_SHIFT 18
> +
> +#define JHB100_PLL_TIMEOUT_US 1000
> +#define JHB100_PLL_INTERVAL_US 100
> +
> +struct jhb100_pll_preset {
> + unsigned long freq;
> + u32 frac; /* frac value should be decimals multiplied by 2^24 */
> + unsigned fbdiv : 12; /* fbdiv value should be 16 to 4095 */
> + unsigned refdiv : 6;
> + unsigned postdiv : 2;
> + unsigned foutpostdiv_en : 1;
> + unsigned foutvcop_en : 1;
> +};
> +
> +struct jhb100_pll_info {
> + char *name;
const char *name ?
> + const struct jhb100_pll_preset *presets;
> + unsigned int npresets;
> + unsigned long flag;
flags
> + u8 offset;
> + bool continuous;
> +};
> +
> +#define _JHB100_PLL(_idx, _name, _presets, _npresets, _offset, _flag, _cont) \
> + [_idx] = { \
> + .name = _name, \
> + .offset = _offset, \
> + .presets = _presets, \
> + .npresets = _npresets, \
> + .flag = _flag, \
> + .continuous = _cont, \
> + }
> +
> +#define JHB100_PLL(idx, name, presets, npresets, offset, cont) \
> + _JHB100_PLL(idx, name, presets, npresets, offset, 0, cont)
> +
> +struct jhb100_pll_match_data {
> + const struct jhb100_pll_info *pll_info;
> + int num_pll;
> +};
> +
> +struct jhb100_pll_data {
> + struct clk_hw hw;
> + unsigned int idx;
> +};
> +
> +struct jhb100_pll_priv {
> + struct device *dev;
> + struct regmap *regmap;
> + const struct jhb100_pll_match_data *match_data;
> + struct jhb100_pll_data pll[];
> +};
> +
> +struct jhb100_pll_regvals {
> + u32 fbdiv;
> + u32 frac;
> + u32 postdiv;
> + u32 refdiv;
> + bool foutpostdiv_en;
> + bool foutvcop_en;
> +};
> +
> +static struct jhb100_pll_data *jhb100_pll_data_from(struct clk_hw *hw)
> +{
> + return container_of(hw, struct jhb100_pll_data, hw);
> +}
> +
> +static struct jhb100_pll_priv *jhb100_pll_priv_from(struct jhb100_pll_data *pll)
> +{
> + return container_of(pll, struct jhb100_pll_priv, pll[pll->idx]);
> +}
> +
> +static int jhb100_pll_prepare(struct clk_hw *hw)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + const struct jhb100_pll_info *info = &priv->match_data->pll_info[pll->idx];
> +
> + return regmap_update_bits(priv->regmap, JHB100_PLLX_CFG2(info->offset),
> + JHB100_PLL_PD, 0);
> +}
> +
> +static void jhb100_pll_unprepare(struct clk_hw *hw)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + const struct jhb100_pll_info *info = &priv->match_data->pll_info[pll->idx];
> +
> + regmap_update_bits(priv->regmap, JHB100_PLLX_CFG2(info->offset),
> + JHB100_PLL_PD, BIT(JHB100_PLL_PD_SHIFT));
> +}
> +
> +static int jhb100_pll_is_prepared(struct clk_hw *hw)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + const struct jhb100_pll_info *info = &priv->match_data->pll_info[pll->idx];
> + u32 val;
> + int ret;
> +
> + ret = regmap_read(priv->regmap, JHB100_PLLX_CFG2(info->offset), &val);
> + if (ret)
> + return ret;
> +
> + return !(val & JHB100_PLL_PD);
> +}
> +
> +static int jhb100_pll_regvals_get(struct regmap *regmap,
> + const struct jhb100_pll_info *info,
> + struct jhb100_pll_regvals *val)
> +{
> + u32 value;
> + int ret;
> +
> + ret = regmap_read(regmap, JHB100_PLLX_CFG0(info->offset), &value);
> + if (ret)
> + return ret;
> +
> + val->fbdiv = (value & JHB100_PLL_FBDIV) >> JHB100_PLL_FBDIV_SHIFT;
> + val->foutpostdiv_en = !!((value & JHB100_PLL_FOUTPOSTDIV_EN) >>
> + JHB100_PLL_FOUTPOSTDIV_EN_SHIFT);
> + val->foutvcop_en = !!((value & JHB100_PLL_FOUTVCOP_EN) >>
> + JHB100_PLL_FOUTVCOP_EN_SHIFT);
> +
> + ret = regmap_read(regmap, JHB100_PLLX_CFG1(info->offset), &value);
> + if (ret)
> + return ret;
> +
> + val->frac = (value & JHB100_PLL_FRAC) >> JHB100_PLL_FRAC_SHIFT;
> +
> + ret = regmap_read(regmap, JHB100_PLLX_CFG2(info->offset), &value);
> + if (ret)
> + return ret;
> +
> + val->postdiv = (value & JHB100_PLL_POSTDIV) >> JHB100_PLL_POSTDIV_SHIFT;
> + val->refdiv = (value & JHB100_PLL_REFDIV) >> JHB100_PLL_REFDIV_SHIFT;
Use FIELD_GET() and FIELD_PREP() throughout to simplify.
> +
> + return 0;
> +}
> +
> +static unsigned long jhb100_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + struct jhb100_pll_regvals val;
> + u32 power = 0;
> + u64 rate;
> + int ret;
> +
> + ret = jhb100_pll_regvals_get(priv->regmap, &priv->match_data->pll_info[pll->idx], &val);
> + if (ret)
> + return 0;
> +
> + /*
> + *
> + * if (foutvcop_en)
> + * rate = parent * (fbdiv + frac / 2^24) / refdiv
> + *
> + * if (foutpostdiv_en)
> + * rate = parent * (fbdiv + frac / 2^24) / refdiv / 2^(postdiv + 1)
> + *
> + * parent * (fbdiv + frac / 2^24) = parent * fbdiv + parent * frac / 2^24
> + */
> +
> + if (!!val.foutvcop_en == !!val.foutpostdiv_en || !val.refdiv)
> + return 0;
> +
> + rate = mul_u32_u32(parent_rate, val.frac) >> 24;
> +
> + if (val.foutpostdiv_en)
> + power = val.postdiv + 1;
> +
> + rate += mul_u32_u32(parent_rate, val.fbdiv);
> + rate = div_u64(rate, (u64)val.refdiv << power);
> +
> + return rate;
> +}
> +
> +static int jhb100_pll_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + const struct jhb100_pll_info *info = &priv->match_data->pll_info[pll->idx];
> + const struct jhb100_pll_preset *selected = &info->presets[0];
> + unsigned int idx;
> +
> + /* if the parent rate doesn't match our expectations the presets won't work */
> + if (req->best_parent_rate != JHB100_PLL_OSC_RATE) {
> + req->rate = jhb100_pll_recalc_rate(hw, req->best_parent_rate);
> + return 0;
> + }
> +
> + /* continuous means support any rate */
> + if (info->continuous)
> + return 0;
> +
> + /* find highest rate lower or equal to the requested rate */
> + for (idx = 1; idx < info->npresets; idx++) {
> + const struct jhb100_pll_preset *val = &info->presets[idx];
> +
> + if (req->rate < val->freq)
> + break;
> +
> + selected = val;
> + }
> +
> + req->rate = selected->freq;
> +
> + return 0;
> +}
> +
> +static int jhb100_pll_set_preset(struct clk_hw *hw, const struct jhb100_pll_preset *val)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + const struct jhb100_pll_info *info = &priv->match_data->pll_info[pll->idx];
> + unsigned int value, cfg;
> + int ret;
> +
> + cfg = ((u32)val->fbdiv << JHB100_PLL_FBDIV_SHIFT) |
> + ((u32)val->foutpostdiv_en << JHB100_PLL_FOUTPOSTDIV_EN_SHIFT) |
> + ((u32)val->foutvcop_en << JHB100_PLL_FOUTVCOP_EN_SHIFT);
> +
> + ret = regmap_update_bits(priv->regmap, JHB100_PLLX_CFG0(info->offset),
> + JHB100_PLL_FBDIV | JHB100_PLL_FOUTPOSTDIV_EN |
> + JHB100_PLL_FOUTVCOP_EN, cfg);
> + if (ret)
> + return ret;
> +
> + ret = regmap_update_bits(priv->regmap, JHB100_PLLX_CFG1(info->offset), JHB100_PLL_FRAC,
> + val->frac << JHB100_PLL_FRAC_SHIFT);
> + if (ret)
> + return ret;
> +
> + cfg = ((u32)val->refdiv << JHB100_PLL_REFDIV_SHIFT) |
> + ((u32)val->postdiv << JHB100_PLL_POSTDIV_SHIFT);
> +
> + ret = regmap_update_bits(priv->regmap, JHB100_PLLX_CFG2(info->offset),
> + JHB100_PLL_REFDIV | JHB100_PLL_POSTDIV, cfg);
> + if (ret)
> + return ret;
> +
> + /* waiting for PLL to lock */
> + return regmap_read_poll_timeout(priv->regmap, JHB100_PLLX_CFG1(info->offset),
> + value, value & JHB100_PLL_LOCK,
> + JHB100_PLL_INTERVAL_US,
> + JHB100_PLL_TIMEOUT_US);
> +}
> +
> +static int jhb100_pll_rate_to_preset(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct jhb100_pll_preset val = {
> + .refdiv = 1,
> + .postdiv = 3,
> + .foutpostdiv_en = 1,
> + .foutvcop_en = 0,
> + };
> + unsigned int power = 0;
> + u64 fbdiv_24, t;
> + u32 fbdiv;
> +
> + if (val.foutpostdiv_en)
> + power = val.postdiv + 1;
> +
> + t = (u64)val.refdiv << power;
> + t *= rate;
> +
> + fbdiv = div64_ul(t, parent_rate);
> + if (fbdiv < 16 || fbdiv > 4095)
> + return -EINVAL;
> + val.fbdiv = fbdiv;
> +
> + fbdiv_24 = div64_ul(t << 24, parent_rate);
> + val.frac = fbdiv_24 - ((u64)fbdiv << 24);
> +
> + return jhb100_pll_set_preset(hw, &val);
> +}
> +
> +static int jhb100_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + const struct jhb100_pll_info *info = &priv->match_data->pll_info[pll->idx];
> + const struct jhb100_pll_preset *val;
> + unsigned int idx;
> +
> + /* if the parent rate doesn't match our expectations the presets won't work */
> + if (parent_rate != JHB100_PLL_OSC_RATE)
> + return -EINVAL;
> +
> + if (info->continuous)
> + return jhb100_pll_rate_to_preset(hw, rate, parent_rate);
> +
> + for (idx = 0, val = &info->presets[0]; idx < info->npresets; idx++, val++) {
> + if (val->freq == rate)
> + return jhb100_pll_set_preset(hw, val);
> + }
> + return -EINVAL;
Add newline before return.
> +}
> +
> +#ifdef CONFIG_DEBUG_FS
> +static int jhb100_pll_registers_read(struct seq_file *s, void *unused)
> +{
> + struct jhb100_pll_data *pll = s->private;
> + struct jhb100_pll_priv *priv = jhb100_pll_priv_from(pll);
> + struct jhb100_pll_regvals val;
> + int ret;
> +
> + ret = jhb100_pll_regvals_get(priv->regmap, &priv->match_data->pll_info[pll->idx], &val);
> + if (ret)
> + return ret;
> +
> + seq_printf(s, "fbdiv=%u\n"
> + "frac=%u\n"
> + "refdiv=%u\n"
> + "postdiv=%u\n"
> + "foutpostdiv_en=%u\n"
> + "foutvcop_en=%u\n",
> + val.fbdiv, val.frac, val.refdiv, val.postdiv,
> + val.foutpostdiv_en, val.foutvcop_en);
> +
> + return 0;
> +}
> +
> +static int jhb100_pll_registers_open(struct inode *inode, struct file *f)
> +{
> + return single_open(f, jhb100_pll_registers_read, inode->i_private);
> +}
> +
> +static const struct file_operations jhb100_pll_registers_ops = {
> + .owner = THIS_MODULE,
> + .open = jhb100_pll_registers_open,
> + .release = single_release,
> + .read = seq_read,
> + .llseek = seq_lseek
> +};
You can use DEFINE_SHOW_ATTRIBUTE() to replace some boilerplate.
> +
> +static void jhb100_pll_debug_init(struct clk_hw *hw, struct dentry *dentry)
> +{
> + struct jhb100_pll_data *pll = jhb100_pll_data_from(hw);
> +
> + debugfs_create_file("registers", 0400, dentry, pll,
> + &jhb100_pll_registers_ops);
> +}
> +#else
> +#define jhb100_pll_debug_init NULL
> +#endif
> +
> +static const struct clk_ops jhb100_pll_ops = {
> + .prepare = jhb100_pll_prepare,
> + .unprepare = jhb100_pll_unprepare,
> + .is_prepared = jhb100_pll_is_prepared,
> + .recalc_rate = jhb100_pll_recalc_rate,
> + .determine_rate = jhb100_pll_determine_rate,
> + .set_rate = jhb100_pll_set_rate,
> + .debug_init = jhb100_pll_debug_init,
> +};
> +
> +static struct clk_hw *jhb100_pll_get(struct of_phandle_args *clkspec, void *data)
> +{
> + struct jhb100_pll_priv *priv = data;
> + unsigned int idx = clkspec->args[0];
> +
> + if (idx < priv->match_data->num_pll)
> + return &priv->pll[idx].hw;
> +
> + return ERR_PTR(-EINVAL);
> +}
> +
> +static int jhb100_pll_probe(struct platform_device *pdev)
> +{
> + const struct jhb100_pll_match_data *match_data;
> + struct jhb100_pll_priv *priv;
> + unsigned int idx;
> + int ret;
> +
> + match_data = of_device_get_match_data(&pdev->dev);
Use device_get_match_data() instead since this is deprecated.
Brian
> + if (!match_data)
> + return -EINVAL;
> +
> + priv = devm_kzalloc(&pdev->dev,
> + struct_size(priv, pll, match_data->num_pll),
> + GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->match_data = match_data;
> + priv->dev = &pdev->dev;
> + priv->regmap = syscon_node_to_regmap(priv->dev->of_node);
> + if (IS_ERR(priv->regmap))
> + return PTR_ERR(priv->regmap);
> +
> + for (idx = 0; idx < match_data->num_pll; idx++) {
> + struct clk_parent_data parents = {
> + .index = 0,
> + };
> + struct clk_init_data init = {
> + .name = match_data->pll_info[idx].name,
> + .ops = &jhb100_pll_ops,
> + .parent_data = &parents,
> + .num_parents = 1,
> + .flags = match_data->pll_info[idx].flag,
> + };
> + struct jhb100_pll_data *pll = &priv->pll[idx];
> +
> + pll->hw.init = &init;
> + pll->idx = idx;
> +
> + ret = devm_clk_hw_register(&pdev->dev, &pll->hw);
> + if (ret)
> + return ret;
> + }
> +
> + return devm_of_clk_add_hw_provider(&pdev->dev, jhb100_pll_get, priv);
> +}
> +
> +static const struct jhb100_pll_preset jhb100_pll2_presets[] = {
> + {
> + .freq = 903168000,
> + .fbdiv = 72,
> + .frac = 4252017,
> + .refdiv = 1,
> + .postdiv = 0,
> + .foutpostdiv_en = 1,
> + .foutvcop_en = 0,
> + },
> +};
> +
> +static const struct jhb100_pll_preset jhb100_pll3_presets[] = {
> + {
> + .freq = 800000000,
> + .fbdiv = 64,
> + .frac = 0,
> + .refdiv = 1,
> + .postdiv = 0,
> + .foutpostdiv_en = 1,
> + .foutvcop_en = 0,
> + },
> +};
> +
> +static const struct jhb100_pll_info jhb100_sys0_pll_info[] = {
> + JHB100_PLL(JHB100_SYS0PLL_PLL2_OUT, "pll2_out", jhb100_pll2_presets,
> + ARRAY_SIZE(jhb100_pll2_presets), JHB100_PLL2_OFFSET, false),
> + _JHB100_PLL(JHB100_SYS0PLL_PLL3_OUT, "pll3_out", jhb100_pll3_presets,
> + ARRAY_SIZE(jhb100_pll3_presets), JHB100_PLL3_OFFSET,
> + CLK_IS_CRITICAL, false),
> + _JHB100_PLL(JHB100_SYS0PLL_PLL4_OUT, "pll4_out", NULL, 0,
> + JHB100_PLL4_OFFSET, CLK_IGNORE_UNUSED, true),
> + _JHB100_PLL(JHB100_SYS0PLL_PLL5_OUT, "pll5_out", NULL, 0,
> + JHB100_PLL5_OFFSET, CLK_IGNORE_UNUSED, true),
> +};
> +
> +static const struct jhb100_pll_match_data jhb100_sys0_pll = {
> + .pll_info = jhb100_sys0_pll_info,
> + .num_pll = ARRAY_SIZE(jhb100_sys0_pll_info),
> +};
> +
> +static const struct of_device_id jhb100_pll_match[] = {
> + {
> + .compatible = "starfive,jhb100-sys0-syscon",
> + .data = &jhb100_sys0_pll,
> + },
> + { /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, jhb100_pll_match);
> +
> +static struct platform_driver jhb100_pll_driver = {
> + .probe = jhb100_pll_probe,
> + .driver = {
> + .name = "clk-starfive-jhb100-pll",
> + .of_match_table = jhb100_pll_match,
> + .suppress_bind_attrs = true,
> + },
> +};
> +builtin_platform_driver(jhb100_pll_driver);
> --
> 2.25.1
>
More information about the linux-riscv
mailing list