[PATCH v12 0/3] riscv: canaan: Add support for K230 clock

[Xukai Wang]

On 2026/4/25 17:29, Xukai Wang wrote:
> This patch series adds clock controller support for the Canaan Kendryte
> K230 SoC. The K230 SoC includes an external 24MHz OSC, 4 internal
> PLLs and an external pulse input, with the controller managing these
> sources and their derived clocks.
>
> The clock tree and hardware-specific definition can be found in the
> vendor's DTS [1],
> and this series is based on the K230 initial series [2].
>
> Link: https://github.com/ruyisdk/linux-xuantie-kernel/blob/linux-6.6.36/arch/riscv/boot/dts/canaan/k230_clock_provider.dtsi [1]
> Link: https://lore.kernel.org/linux-clk/tencent_F76EB8D731C521C18D5D7C4F8229DAA58E08@qq.com/ [2]
>
> Co-developed-by: Troy Mitchell <TroyMitchell988 at gmail.com>
> Signed-off-by: Troy Mitchell <TroyMitchell988 at gmail.com>
> Signed-off-by: Xukai Wang <kingxukai at zohomail.com>
>
> ---
> Changes in v12:
> - Rebase onto linux-next (next-20260421).
> - Migrate from deprecated round_rate() clk_ops to determine_rate() API.
> - dt-bindings: Drop redundant "bindings for" in commit subject.
> - Link to v11: https://lore.kernel.org/r/20260214-b4-k230-clk-v11-0-6de365489b89@zohomail.com
Hi Stephen,

I hope this email finds you well. I am writing to politely inquire about
the status of the Canaan K230 clock controller driver patch series.

It has been approximately one and a half years since I first submitted
this series, and it has now reached version 12. Most of the intermediate
versions contained only minor adjustments and rebases, and I have been
resending it periodically without receiving any review feedback.

I would greatly appreciate it if you could let me know whether this
series is ready for merging, or if there are any specific issues that
need to be addressed. I am ready to make any required changes immediately.

I apologize for the intrusion and thank you for your time and hard work
maintaining the clock subsystem.

-- 
Best regards,
Xukai Wang