[PATCH 2/2] riscv: dts: sophgo: Add dma-coherent to SG2042 PCIe controllers

[Chen Wang]

On 4/1/2026 1:12 AM, Han Gao wrote:
> SG2042's PCIe root complexes are cache-coherent with the CPU. Mark all
> four PCIe controller nodes (pcie_rc0 through pcie_rc3) as dma-coherent
> so the kernel uses coherent DMA mappings instead of non-coherent bounce
> buffering.
>
> Cc: stable at vger.kernel.org
> Signed-off-by: Han Gao <gaohan at iscas.ac.cn>
> ---
>   arch/riscv/boot/dts/sophgo/sg2042.dtsi | 4 ++++
>   1 file changed, 4 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
> index 9fddf3f0b3b9..3af770549742 100644
> --- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
> @@ -417,6 +417,7 @@ pcie_rc0: pcie at 7060000000 {
>   			vendor-id = <0x1f1c>;
>   			device-id = <0x2042>;
>   			cdns,no-bar-match-nbits = <48>;
> +			dma-coherent;
>   			msi-parent = <&msi>;
>   			status = "disabled";
>   		};
> @@ -439,6 +440,7 @@ pcie_rc1: pcie at 7060800000 {
>   			vendor-id = <0x1f1c>;
>   			device-id = <0x2042>;
>   			cdns,no-bar-match-nbits = <48>;
> +			dma-coherent;
>   			msi-parent = <&msi>;
>   			status = "disabled";
>   		};
> @@ -461,6 +463,7 @@ pcie_rc2: pcie at 7062000000 {
>   			vendor-id = <0x1f1c>;
>   			device-id = <0x2042>;
>   			cdns,no-bar-match-nbits = <48>;
> +			dma-coherent;
>   			msi-parent = <&msi>;
>   			status = "disabled";
>   		};
> @@ -483,6 +486,7 @@ pcie_rc3: pcie at 7062800000 {
>   			vendor-id = <0x1f1c>;
>   			device-id = <0x2042>;
>   			cdns,no-bar-match-nbits = <48>;
> +			dma-coherent;
>   			msi-parent = <&msi>;
>   			status = "disabled";
>   		};
For binding changes, LGTM. But I have a question regarding this change 
in dtsi.

 From your patch description, I understand that enabling the 
`dma-coherent` attribute requires upgrading the firmware `fip.bin`. If a 
user only updates the kernel (which is relatively easy) but forgets or 
doesn't know how to upgrade the firmware, enabling `coherent` might 
cause the kernel to skip all explicit cache maintenance operations. 
Could this pose a subtle risk?

Wouldn't it be safer to leave the upstream unchanged in dtsi and allow 
users to add the `dma-coherent` attribute themselves after they upgrade 
the firmware?

I would greatly appreciate your guidance.

Thanks,

Chen