[PATCH 2/2] riscv: dts: spacemit: Add MusePi Pro board device tree

[Troy Mitchell]

From: Troy Mitchell <troy.mitchell at linux.spacemit.com>

Add initial device tree support for the MusePi Pro board [1].
The board is using the SpacemiT K1/M1 SoC.

The device tree is adapted from the SpacemiT vendor tree [2].

This minimal device tree enables booting into a serial console with UART
output and a blinking LED.

Link:
https://developer.spacemit.com/documentation?token=YJtdwnvvViPVcmkoPDpcvwfVnrh&type=pdf [1]
https://gitee.com/bianbu-linux/linux-6.6/blob/k1-bl-v2.2.y/arch/riscv/boot/dts/spacemit/k1-x_MUSE-Pi-Pro.dts [2]

Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
---
 arch/riscv/boot/dts/spacemit/Makefile          |  1 +
 arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts | 40 ++++++++++++++++++++++++++
 2 files changed, 41 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
index 152832644870624d8fd77684ef33addb42b0baf3..76b98096e2a46c3192651d6d66af7742f740c635 100644
--- a/arch/riscv/boot/dts/spacemit/Makefile
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -2,3 +2,4 @@
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += k1-musepi-pro.dtb
diff --git a/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
new file mode 100644
index 0000000000000000000000000000000000000000..3791186ce47b88887eab4321dcd7035668e7f02d
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k1-musepi-pro.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy at cyyself.name>
+ * Copyright (C) 2025 Troy Mitchell <troy.mitchell at linux.spacemit.com>
+ */
+
+/dts-v1/;
+
+#include "k1.dtsi"
+#include "k1-pinctrl.dtsi"
+
+/ {
+	model = "MusePi Pro";
+	compatible = "spacemit,musepi-pro", "spacemit,k1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "sys-led";
+			gpios = <&gpio K1_GPIO(96) GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_2_cfg>;
+	status = "okay";
+};

-- 
2.51.0