[PATCH v3 0/3] riscv: dts: spacemit: add 24c02 eeprom on BPI-F3

[Troy Mitchell]

On Fri, Sep 26, 2025 at 07:54:36PM +0200, Aurelien Jarno wrote:
> The BPI-F3 board has a 24c02 eeprom connected to the i2c bus #2. It
> holds board data. This patchset adds support for it.
> 
> Changes between version 2 and version 3:
>   
> - Revert the name change for i2c2-0-cfg and i2c2-0-pins, the second cell
>   is not a function number, but an index.
> 
> Here is version 2 of this series:
>   https://lore.kernel.org/lkml/20250923205028.2355244-1-aurelien@aurel32.net/  
> 
> Changes between version 1 and version 2:
>  - Rename i2c2-0-cfg and i2c2-0-pins into i2c2-4-cfg and i2c2-4-pins to match
>    the naming convention encoding the function number in the second cell.
>  - Rename the 24c02 supply name label to buck3_1v8
>  - Add a onie,tlv-layout nvmem layout describing the content of the 24c02 eeprom
> 
> Here is version 1 of this series:
>   https://lore.kernel.org/lkml/20250921210237.943370-1-aurelien@aurel32.net/
> 
> 
> Aurelien Jarno (3):
>   riscv: dts: spacemit: enable the i2c2 adapter on BPI-F3
>   riscv: dts: spacemit: add 24c02 eeprom on BPI-F3
>   riscv: dts: spacemit: add i2c aliases on BPI-F3
> 
>  .../boot/dts/spacemit/k1-bananapi-f3.dts      | 33 ++++++++++++++++++-
>  arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi  |  7 ++++
>  arch/riscv/boot/dts/spacemit/k1.dtsi          | 13 ++++++++
>  3 files changed, 52 insertions(+), 1 deletion(-)
Reviewed-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> 
> -- 
> 2.47.2
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv