[PATCH v2 5/6] i2c: spacemit: ensure SDA is released after bus reset

[Aurelien Jarno]

On 2025-09-25 10:02, Troy Mitchell wrote:
> After performing a conditional bus reset, the controller must ensure
> that the SDA line is actually released.
> 
> Previously, the reset routine only performed a single check,
> which could leave the bus in a locked state in some situations.
> 
> This patch introduces a loop that toggles the reset cycle and issues
> a reset request up to SPACEMIT_BUS_RESET_CLK_CNT_MAX times, checking
> SDA after each attempt. If SDA is released before the maximum count,
> the function returns early. Otherwise, a warning is emitted.
> 
> This change improves bus recovery reliability.
> 
> Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
> Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> ---
>  drivers/i2c/busses/i2c-k1.c | 21 ++++++++++++++++++++-
>  1 file changed, 20 insertions(+), 1 deletion(-)

Reviewed-by: Aurelien Jarno <aurelien at aurel32.net>

-- 
Aurelien Jarno                          GPG: 4096R/1DDD8C9B
aurelien at aurel32.net                     http://aurel32.net