[PATCH 4/6] i2c: spacemit: check SDA instead of SCL after bus reset

[Troy Mitchell]

On Mon, Sep 22, 2025 at 10:56:04PM +0200, Aurelien Jarno wrote:
> On 2025-08-27 15:39, Troy Mitchell wrote:
> > After calling spacemit_i2c_conditionally_reset_bus(),
> > the controller should ensure that the SDA line is release
> > before proceeding.
> > 
> > Previously, the driver checked the SCL line instead,
> > which does not guarantee that the bus is truly idle.
> > 
> > This patch changes the check to verify SDA. This ensures
> > proper bus recovery and avoids potential communication errors
> > after a conditional reset.
> > 
> > Fixes: 5ea558473fa31 ("i2c: spacemit: add support for SpacemiT K1 SoC")
> > Signed-off-by: Troy Mitchell <troy.mitchell at linux.spacemit.com>
> > ---
> >  drivers/i2c/busses/i2c-k1.c | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
> > index c1656b78f1681729ccc2ebca6e290259d14889d9..4d78ee7b6929ee43771e500d4f85d9e55e68b221 100644
> > --- a/drivers/i2c/busses/i2c-k1.c
> > +++ b/drivers/i2c/busses/i2c-k1.c
> > @@ -172,9 +172,9 @@ static void spacemit_i2c_conditionally_reset_bus(struct spacemit_i2c_dev *i2c)
> >  	spacemit_i2c_reset(i2c);
> >  	usleep_range(10, 20);
> >  
> > -	/* check scl status again */
> > +	/* check sda again here */
> >  	status = readl(i2c->base + SPACEMIT_IBMR);
> > -	if (!(status & SPACEMIT_BMR_SCL))
> > +	if (!(status & SPACEMIT_BMR_SDA))
> >  		dev_warn_ratelimited(i2c->dev, "unit reset failed\n");
> >  }
> 
> Reviewed-by: Aurelien Jarno <aurelien at aurel32.net>
Thanks for the RB!
                - Troy
> 
> -- 
> Aurelien Jarno                          GPG: 4096R/1DDD8C9B
> aurelien at aurel32.net                     http://aurel32.net
>