[PATCH 2/3] riscv: dts: spacemit: add 24c02 eeprom on BPI-F3

[Yixun Lan]

Hi Aurelien,

On 06:49 Mon 22 Sep     , Aurelien Jarno wrote:
> Hi,
> 
> On 2025-09-22 11:21, Yixun Lan wrote:
> > Hi Aurelien,
> > 
> > On 23:01 Sun 21 Sep     , Aurelien Jarno wrote:
> > > The BPI-F3 contains a 24c02 eeprom, that contains among other things the
> > > MAC addresses of the two network interfaces. For this reason, mark it as
> > > read-only.
> > > 
> > > Signed-off-by: Aurelien Jarno <aurelien at aurel32.net>
> > > ---
> > >  arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 11 ++++++++++-
> > >  1 file changed, 10 insertions(+), 1 deletion(-)
> > > 
> > > diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> > > index 3b6e4f52e9aad..574d10fdf9b82 100644
> > > --- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> > > +++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
> > > @@ -115,6 +115,15 @@ &i2c2 {
> > >  	pinctrl-0 = <&i2c2_0_cfg>;
> > >  	pinctrl-names = "default";
> > >  	status = "okay";
> > > +
> > > +	eeprom at 50 {
> > > +		compatible = "atmel,24c02";
> > > +		reg = <0x50>;
> > > +		vcc-supply = <&vcc1v8_sys>;
> > > +		pagesize = <16>;
> > ..
> > > +		read-only;
> > so you're sure there is no demand to write data to eeprom?
> > (update info at linux env)
> 
> It seems to only contains board infos (mac addresses), but if there are 
> other use cases, that can indeed be dropped.
> 
On my second thought, I'm ok with it being "read-only", as we flash these
infos during firmware burning stage, then never alter them later.

> > > +		size = <256>;
> > > +	};
> > >  };
> > >  
> > >  &i2c8 {
> > > @@ -143,7 +152,7 @@ buck2 {
> > >  				regulator-always-on;
> > >  			};
> > >  
> > > -			buck3 {
> > > +			vcc1v8_sys: buck3 {
> > I'm not sure if adding an alias here is a good idea, it occurs buck3
> > serve the suppy for many devices, besides, to me it's more proper to
> > name it as eeprom_vcc1v8 for the eeprom according to schematics in
> > this case..
> 
> We need to add a label to be able to reference it for the eeprom 
> vcc-supply, but we'll have to also reference it for other devices (e.g.  
> emmc, wifi, phys, etc... It tried to choose a common name, ie the right 
> most one on the schematics. Another option could be to call it buck3, 
> but other name suggestions are welcome.
how about simply making it "buck3_1v8", then probably add a comment
later in the eeprom node? to mapping to the shecmatics
	vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
> 
> -- 
> Aurelien Jarno                          GPG: 4096R/1DDD8C9B
> aurelien at aurel32.net                     http://aurel32.net

-- 
Yixun Lan (dlan)