[PATCH net-next v12 0/5] Add Ethernet MAC support for SpacemiT K1

[Vivian Wang]

Hi Marek,

Thanks for the testing.

On 9/19/25 16:27, Marek Szyprowski wrote:
> Hi All,
>
> On 14.09.2025 06:23, Vivian Wang wrote:
>> SpacemiT K1 has two gigabit Ethernet MACs with RGMII and RMII support.
>> Add devicetree bindings, driver, and DTS for it.
>>
>> Tested primarily on BananaPi BPI-F3. Basic TX/RX functionality also
>> tested on Milk-V Jupiter.
>>
>> I would like to note that even though some bit field names superficially
>> resemble that of DesignWare MAC, all other differences point to it in
>> fact being a custom design.
>>
>> Based on SpacemiT drivers [1]. These patches are also available at:
>>
>> https://github.com/dramforever/linux/tree/k1/ethernet/v12
>>
>> [1]: https://github.com/spacemit-com/linux-k1x
> This driver recently landed in linux-next as commit bfec6d7f2001 ("net: 
> spacemit: Add K1 Ethernet MAC"). In my tests I found that it 
> triggers lock dep warnings related to stats_lock acquisition. In the 
> current code it is being acquired with spin_lock(). For tests I've 
> changed that to spin_lock_irqsave() and the warnings went away, but I'm 
> not sure that this is the proper fix. I've also checked the driver 
> history and 'irqsave' locking was used in pre-v7 version, but it was 
> removed later on Jakub's request and described a bit misleading as 
> "Removed scoped_guard usage".

Oops, I had assumed that irqsave was unnecessary and missed that the
statistics functions are called with softirq enabled during
register_netdev. The ones called at probe time should be changed to
_irqsave or some other variant.

I'll take a look at the details myself and send a fix.

Thanks,
Vivian "dramforever" Wang