[PATCH v2 2/5] dt-bindings: Add Andes QiLai PCIe support

[Frank Li]

On Tue, Sep 16, 2025 at 06:04:14PM +0800, Randolph Lin wrote:
> Add the Andes QiLai PCIe node, which includes 3 Root Complexes.
> Only one example is required in the DTS bindings YAML file.
>
> Signed-off-by: Randolph Lin <randolph at andestech.com>
> ---
>  .../bindings/pci/andestech,qilai-pcie.yaml    | 102 ++++++++++++++++++
>  1 file changed, 102 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml b/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
> new file mode 100644
> index 000000000000..41d3d4eb0026
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/andestech,qilai-pcie.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/andestech,qilai-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Andes QiLai PCIe host controller
> +
> +description: |+

Needn't |+

> +  Andes QiLai PCIe host controller is based on the Synopsys DesignWare
> +  PCI core. It shares common features with the PCIe DesignWare core and
> +  inherits common properties defined in
> +  Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml.
> +
> +maintainers:
> +  - Randolph Lin <randolph at andestech.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie.yaml#

Move after required, in case add if-else in future.

> +
> +properties:
> +  compatible:
> +    const: andestech,qilai-pcie
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: APB registers.
> +      - description: PCIe configuration space region.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: apb
> +      - const: config
> +
> +  ranges:
> +    maxItems: 2
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupt-map: true
> +
> +required:
> +  - reg
> +  - reg-names
> +  - "#interrupt-cells"
> +  - interrupts
> +  - interrupt-names
> +  - interrupt-map-mask
> +  - interrupt-map
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    soc {
> +      #address-cells = <2>;
> +      #size-cells = <2>;
> +
> +      bus at 80000000 {
> +        compatible = "simple-bus";
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +        dma-ranges = <0x44 0x00000000 0x04 0x00000000 0x04 0x00000000>;
> +        ranges = <0x00 0x80000000 0x00 0x80000000 0x00 0x20000000>,
> +                 <0x00 0x04000000 0x00 0x04000000 0x00 0x00001000>,
> +                 <0x00 0x00000000 0x20 0x00000000 0x20 0x00000000>;
> +
> +        pci at 80000000 {
> +          compatible = "andestech,qilai-pcie";
> +          device_type = "pci";
> +          reg = <0x0 0x80000000 0x0 0x20000000>,
> +                <0x0 0x04000000 0x0 0x00001000>,
> +                <0x0 0x00000000 0x0 0x00010000>;

reg should just after compatible

   compatible
   reg
   reg-name
   ...

Frank
> +          reg-names = "dbi", "apb", "config";
> +
> +          bus-range = <0x0 0xff>;
> +          num-viewport = <4>;
> +          #address-cells = <3>;
> +          #size-cells = <2>;
> +          ranges = <0x02000000 0x00 0x10000000 0x00 0x10000000 0x0 0xf0000000>,
> +                   <0x43000000 0x01 0x00000000 0x01 0x0000000 0x1f 0x00000000>;
> +
> +          #interrupt-cells = <1>;
> +          interrupts = <0xf>;
> +          interrupt-names = "msi";
> +          interrupt-parent = <&plic0>;
> +          interrupt-map-mask = <0 0 0 7>;
> +          interrupt-map = <0 0 0 1 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
> +                          <0 0 0 2 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
> +                          <0 0 0 3 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>,
> +                          <0 0 0 4 &plic0 0xf IRQ_TYPE_LEVEL_HIGH>;
> +        };
> +      };
> +    };
> --
> 2.34.1
>