[PATCH RESEND v3 6/9] riscv: dts: thead: add DPU and HDMI device tree nodes

[Icenowy Zheng]

From: Icenowy Zheng <uwu at icenowy.me>

T-Head TH1520 SoC contains a Verisilicon DC8200 display controller
(called DPU in manual) and a Synopsys DesignWare HDMI TX controller.

Add device tree nodes to them.

Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda at iscas.ac.cn>
---
Changes in v3:
- Adapting to the changed binding.

No changes in v2.

 arch/riscv/boot/dts/thead/th1520.dtsi | 70 +++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index e680d1a7c821f..1dcb52b78bc69 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -536,6 +536,76 @@ clk_vo: clock-controller at ffef528050 {
 			#clock-cells = <1>;
 		};
 
+		hdmi: hdmi at ffef540000 {
+			compatible = "thead,th1520-dw-hdmi";
+			reg = <0xff 0xef540000 0x0 0x40000>;
+			reg-io-width = <4>;
+			interrupts = <111 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_vo CLK_HDMI_PCLK>,
+				 <&clk_vo CLK_HDMI_SFR>,
+				 <&clk_vo CLK_HDMI_CEC>,
+				 <&clk_vo CLK_HDMI_PIXCLK>;
+			clock-names = "iahb", "isfr", "cec", "pix";
+			resets = <&rst TH1520_RESET_ID_HDMI>,
+				 <&rst TH1520_RESET_ID_HDMI_APB>;
+			reset-names = "main", "apb";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+
+					hdmi_in: endpoint {
+						remote-endpoint = <&dpu_out_dp1>;
+					};
+				};
+
+				hdmi_out_port: port at 1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		dpu: display at ffef600000 {
+			compatible = "thead,th1520-dc8200", "verisilicon,dc";
+			reg = <0xff 0xef600000 0x0 0x100000>;
+			interrupts = <93 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_vo CLK_DPU_CCLK>,
+				 <&clk_vo CLK_DPU_ACLK>,
+				 <&clk_vo CLK_DPU_HCLK>,
+				 <&clk_vo CLK_DPU_PIXELCLK0>,
+				 <&clk_vo CLK_DPU_PIXELCLK1>;
+			clock-names = "core", "axi", "ahb", "pix0", "pix1";
+			resets = <&rst TH1520_RESET_ID_DPU_CORE>,
+				 <&rst TH1520_RESET_ID_DPU_AXI>,
+				 <&rst TH1520_RESET_ID_DPU_AHB>;
+			reset-names = "core", "axi", "ahb";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dpu_port0: port at 0 {
+					reg = <0>;
+				};
+
+				dpu_port1: port at 1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					dpu_out_dp1: endpoint at 1 {
+						reg = <1>;
+						remote-endpoint = <&hdmi_in>;
+					};
+				};
+			};
+		};
+
 		dmac0: dma-controller at ffefc00000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0xff 0xefc00000 0x0 0x1000>;
-- 
2.52.0