[PATCH v4 6/6] riscv: dts: starfive: Add VisionFive 2 Lite eMMC board device tree

E Shattow e at freeshell.de
Tue Nov 25 17:45:04 PST 2025



On 11/24/25 23:56, Hal Feng wrote:
> VisionFive 2 Lite eMMC board uses a non-removable onboard 64GiB eMMC
> instead of the MicroSD slot.
> 
> Acked-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> Tested-by: Matthias Brugger <mbrugger at suse.com>
> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> ---
>  arch/riscv/boot/dts/starfive/Makefile         |  1 +
>  ...jh7110-starfive-visionfive-2-lite-emmc.dts | 22 +++++++++++++++++++
>  2 files changed, 23 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite-emmc.dts
> 
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 2b1e7fcd6f84..a640ed5dc5a1 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -14,5 +14,6 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite.dtb
> +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite-emmc.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite-emmc.dts b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite-emmc.dts
> new file mode 100644
> index 000000000000..e27a662d4022
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite-emmc.dts
> @@ -0,0 +1,22 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2025 StarFive Technology Co., Ltd.
> + * Copyright (C) 2025 Hal Feng <hal.feng at starfivetech.com>
> + */
> +
> +/dts-v1/;
> +#include "jh7110-starfive-visionfive-2-lite.dtsi"
> +
> +/ {
> +	model = "StarFive VisionFive 2 Lite eMMC";

> +	compatible = "starfive,visionfive-2-lite-emmc", "starfive,jh7110s";

Add "starfive,jh7110" to the compatible list as the least-compatible
(left-to-right order last item):

compatible = "starfive,visionfive-2-lite-emmc", "starfive,jh7110s",
"starfive,jh7110";

or if there is review feedback that no new compatible should be added,
then as usual for new JH-7110 boards:

compatible = "starfive,visionfive-2-lite-emmc", "starfive,jh7110";

> +};
> +
> +&mmc0 {
> +	cap-mmc-highspeed;
> +	cap-mmc-hw-reset;
> +	mmc-ddr-1_8v;
> +	mmc-hs200-1_8v;
> +	vmmc-supply = <&vcc_3v3>;
> +	vqmmc-supply = <&emmc_vdd>;
> +};

-E



More information about the linux-riscv mailing list