[PATCH v3 3/5] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants

[Emil Renner Berthing]

Quoting Hal Feng (2025-11-20 09:29:44)
> Add common board dtsi for use by VisionFive 2 Lite variants.
>
> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> ---
>  .../jh7110s-starfive-visionfive-2-lite.dtsi   | 691 ++++++++++++++++++
>  1 file changed, 691 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi
> new file mode 100644
> index 000000000000..aa375c4a3fa3
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi
> @@ -0,0 +1,691 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2025 StarFive Technology Co., Ltd.
> + * Copyright (C) 2025 Hal Feng <hal.feng at starfivetech.com>
> + */
> +
> +/dts-v1/;
> +#include "jh7110.dtsi"
> +#include "jh7110-pinfunc.h"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
''
I'm confused. In [1] you said "remove jh7110s-common.dtsi, because only one
board uses JH7110S now." but this series still adds two different boards.

Also this derives from jh7110.dtsi rather than from jh7110-common.dts as I
suggested in [2].

In any case I'm fine with doing it this way, so
Acked-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

[1]: https://lore.kernel.org/linux-riscv/ZQ2PR01MB13076544E2136E7E7C2EEDA1E6CD2@ZQ2PR01MB1307.CHNPR01.prod.partner.outlook.cn/
[2]: https://lore.kernel.org/linux-riscv/CAJM55Z-MfpVX3EuQ_AjvDSk6FwR51R5cQdN5RybS9pbJ8r9NNg@mail.gmail.com/