[PATCH 2/3] i2c: k1: add reset support

[Troy Mitchell]

Hi Encrow,

On Wed, Nov 19, 2025 at 07:46:44PM +0800, Encrow Thorne wrote:
> Add reset control handling to the K1 I2C driver.
> 
> Signed-off-by: Encrow Thorne <jyc0019 at gmail.com>
> ---
>  drivers/i2c/busses/i2c-k1.c | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-k1.c b/drivers/i2c/busses/i2c-k1.c
> index 6b918770e612..64d817d8315d 100644
> --- a/drivers/i2c/busses/i2c-k1.c
> +++ b/drivers/i2c/busses/i2c-k1.c
> @@ -10,6 +10,7 @@
>   #include <linux/module.h>
>   #include <linux/of_address.h>
>   #include <linux/platform_device.h>
> + #include <linux/reset.h>
>  
>  /* spacemit i2c registers */
>  #define SPACEMIT_ICR		 0x0		/* Control register */
> @@ -113,6 +114,7 @@ struct spacemit_i2c_dev {
>  	void __iomem *base;
>  	int irq;
>  	u32 clock_freq;
> +	struct reset_control *resets;
>  
>  	struct i2c_msg *msgs;
>  	u32 msg_num;
> @@ -571,6 +573,15 @@ static int spacemit_i2c_probe(struct platform_device *pdev)
>  	if (IS_ERR(clk))
>  		return dev_err_probe(dev, PTR_ERR(clk), "failed to enable bus clock");
>  
> +	i2c->resets = devm_reset_control_get_optional(dev, NULL);
> +	if (IS_ERR(i2c->resets))
> +		return dev_err_probe(dev, PTR_ERR(i2c->resets),
> +				    "failed to get reset\n");
Please align.

> +
> +	reset_control_assert(i2c->resets);
> +	udelay(2);
This seems to be a very small value. If this
has been verified multiple times?

                        - Troy
> +	reset_control_deassert(i2c->resets);
> +
>  	spacemit_i2c_reset(i2c);
>  
>  	i2c_set_adapdata(&i2c->adapt, i2c);
> 
> -- 
> 2.25.1
> 
>