[PATCH RFC 05/13] dt-bindings: mfd: Add starfive,jh7110-hdmi-mfd
Michal Wilczynski
m.wilczynski at samsung.com
Fri Nov 7 17:04:39 PST 2025
Add the dt-binding for the StarFive JH7110 HDMI MFD (Multi-Function
Device).
The JH7110 HDMI IP is a monolithic block containing both the digital
controller and analog PHY in a single register space. This binding
defines the MFD parent device, which holds the shared register map and
populates its two children: the PHY and the controller. This is
necessary to resolve a circular clock dependency between the HDMI block
and the VOUT clock generator.
Signed-off-by: Michal Wilczynski <m.wilczynski at samsung.com>
---
.../bindings/mfd/starfive,jh7110-hdmi-mfd.yaml | 93 ++++++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 94 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-mfd.yaml b/Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-mfd.yaml
new file mode 100644
index 0000000000000000000000000000000000000000..2cbfb2b975083240575a0567b06e6cafd542cf9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-mfd.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/starfive,jh7110-hdmi-mfd.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 HDMI MFD (Controller+PHY)
+
+maintainers:
+ - Michal Wilczynski <m.wilczynski at samsung.com>
+
+description:
+ The StarFive JH7110 HDMI block is a monolithic IP containing both
+ the digital controller logic and the analog PHY logic in a single
+ register space.
+
+properties:
+ compatible:
+ const: starfive,jh7110-hdmi-mfd
+
+ reg:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+patternProperties:
+ "^phy(@[0-9a-f]+)?$":
+ $ref: ../phy/starfive,jh7110-inno-hdmi-phy.yaml#
+ "^controller(@[0-9a-f]+)?$":
+ $ref: ../display/bridge/starfive,jh7110-inno-hdmi-controller.yaml#
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/starfive,jh7110-crg.h>
+ #include <dt-bindings/reset/starfive,jh7110-crg.h>
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ hdmi_mfd: hdmi at 29590000 {
+ compatible = "starfive,jh7110-hdmi-mfd";
+ reg = <0x29590000 0x4000>;
+
+ hdmi_phy: phy {
+ compatible = "starfive,jh7110-inno-hdmi-phy";
+ clocks = <&xin24m>;
+ clock-names = "refoclk";
+ #clock-cells = <0>;
+ clock-output-names = "hdmi_pclk";
+ #phy-cells = <0>;
+ };
+
+ hdmi_controller: controller {
+ compatible = "starfive,jh7110-inno-hdmi-controller";
+ interrupts = <99>;
+ clocks = <&voutcrg JH7110_VOUTCLK_HDMI_TX_SYS>,
+ <&voutcrg JH7110_VOUTCLK_HDMI_TX_MCLK>,
+ <&voutcrg JH7110_VOUTCLK_HDMI_TX_BCLK>,
+ <&hdmi_phy>;
+ clock-names = "sys", "mclk", "bclk", "pclk";
+ resets = <&voutcrg JH7110_VOUTRST_HDMI_TX_HDMI>;
+ reset-names = "hdmi_tx";
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi-phy";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&dpu_out_dpi0>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+ hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 66fab45bbee8c1a5f73d09bb470d28029b8c6139..052876c6538f980f75ff64e78b6ebea460307904 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24048,6 +24048,7 @@ STARFIVE JH7110 DISPLAY SUBSYSTEM
M: Michal Wilczynski <m.wilczynski at samsung.com>
S: Maintained
F: Documentation/devicetree/bindings/display/bridge/starfive,jh7110-inno-hdmi-controller.yaml
+F: Documentation/devicetree/bindings/mfd/starfive,jh7110-hdmi-mfd.yaml
F: Documentation/devicetree/bindings/phy/starfive,jh7110-inno-hdmi-phy.yaml
F: Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-vout-subsystem.yaml
--
2.34.1
More information about the linux-riscv
mailing list