[PATCH v4 5/8] net: stmmac: qcom-ethqos: split power management fields into a separate structure

[Bartosz Golaszewski]

From: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>

Now that we have a separate wrapper for device match data, let's extend
this structure with a pointer to the structure containing fields related
to power-management only. This is done because a device may have the
same device settings but different power management mode (e.g.: firmware
vs manual).

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
 .../net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c   | 19 ++++++++++++++++---
 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
index 9cafe101049d5412d649b3beaca350c497ffc981..1f00556bbad997e2ec76b521cffe2eb14fabb79e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c
@@ -91,14 +91,18 @@ struct ethqos_emac_driver_data {
 	unsigned int num_por;
 	bool rgmii_config_loopback_en;
 	bool has_emac_ge_3;
-	const char *link_clk_name;
 	u32 dma_addr_width;
 	struct dwmac4_addrs dwmac4_addrs;
 	bool needs_sgmii_loopback;
 };
 
+struct ethqos_emac_pm_data {
+	const char *link_clk_name;
+};
+
 struct ethqos_emac_match_data {
 	const struct ethqos_emac_driver_data *drv_data;
+	const struct ethqos_emac_pm_data *pm_data;
 };
 
 struct qcom_ethqos {
@@ -292,7 +296,6 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	.num_por = ARRAY_SIZE(emac_v4_0_0_por),
 	.rgmii_config_loopback_en = false,
 	.has_emac_ge_3 = true,
-	.link_clk_name = "phyaux",
 	.needs_sgmii_loopback = true,
 	.dma_addr_width = 36,
 	.dwmac4_addrs = {
@@ -313,8 +316,13 @@ static const struct ethqos_emac_driver_data emac_v4_0_0_data = {
 	},
 };
 
+static const struct ethqos_emac_pm_data emac_sa8775p_pm_data = {
+	.link_clk_name = "phyaux",
+};
+
 static const struct ethqos_emac_match_data emac_sa8775p_data = {
 	.drv_data = &emac_v4_0_0_data,
+	.pm_data = &emac_sa8775p_pm_data,
 };
 
 static int ethqos_dll_configure(struct qcom_ethqos *ethqos)
@@ -771,11 +779,13 @@ static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv)
 static int qcom_ethqos_probe(struct platform_device *pdev)
 {
 	const struct ethqos_emac_driver_data *drv_data;
+	const struct ethqos_emac_pm_data *pm_data;
 	const struct ethqos_emac_match_data *data;
 	struct plat_stmmacenet_data *plat_dat;
 	struct stmmac_resources stmmac_res;
 	struct device *dev = &pdev->dev;
 	struct qcom_ethqos *ethqos;
+	const char *clk_name;
 	int ret, i;
 
 	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
@@ -823,6 +833,9 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 
 	data = device_get_match_data(dev);
 	drv_data = data->drv_data;
+	pm_data = data->pm_data;
+	clk_name = pm_data && pm_data->link_clk_name ?
+				pm_data->link_clk_name : "rgmii";
 
 	ethqos->por = drv_data->por;
 	ethqos->num_por = drv_data->num_por;
@@ -830,7 +843,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev)
 	ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3;
 	ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback;
 
-	ethqos->link_clk = devm_clk_get(dev, drv_data->link_clk_name ?: "rgmii");
+	ethqos->link_clk = devm_clk_get(dev, clk_name);
 	if (IS_ERR(ethqos->link_clk))
 		return dev_err_probe(dev, PTR_ERR(ethqos->link_clk),
 				     "Failed to get link_clk\n");

-- 
2.51.0