[PATCH v4 0/8] net: stmmac: qcom-ethqos: add support for SCMI power domains

[Bartosz Golaszewski]

Add support for the firmware-managed variant of the DesignWare MAC on
the sa8255p platform. This series contains new DT bindings and driver
changes required to support the MAC in the STMMAC driver.

It also reorganizes the ethqos code quite a bit to make the introduction
of power domains into the driver a bit easier on the eye.

The DTS changes will go in separately.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski at linaro.org>
---
Changes in v4:
- Remove the phys property from the SCMI bindings
- Mark the power-domain-names property as required
- Set maxItems for power-domains to 1 for all existing bindings to
  maintain the current requirements after modifying the value in the
  top-level document
- Link to v3: https://lore.kernel.org/r/20251027-qcom-sa8255p-emac-v3-0-75767b9230ab@linaro.org

Changes in v3:
- Drop 'power' and 'perf' prefixes from power domain names
- Rebase on top of Russell's changes to dwmac
- Rebase on top of even more changes from Russell that are not yet
  in next (E1vB6ld-0000000BIPy-2Qi4 at rmk-PC.armlinux.org.uk)
- Link to v2: https://lore.kernel.org/all/20251008-qcom-sa8255p-emac-v2-0-92bc29309fce@linaro.org/

Changes in v2:
- Fix the power-domains property in DT bindings
- Rework the DT bindings example
- Drop the DTS patch, it will go upstream separately
- Link to v1: https://lore.kernel.org/r/20250910-qcom-sa8255p-emac-v1-0-32a79cf1e668@linaro.org

---
Bartosz Golaszewski (8):
      dt-bindings: net: qcom: document the ethqos device for SCMI-based systems
      net: stmmac: qcom-ethqos: use generic device properties
      net: stmmac: qcom-ethqos: improve typing in devres callback
      net: stmmac: qcom-ethqos: wrap emac driver data in additional structure
      net: stmmac: qcom-ethqos: split power management fields into a separate structure
      net: stmmac: qcom-ethqos: split power management context into a separate struct
      net: stmmac: qcom-ethqos: define a callback for setting the serdes speed
      net: stmmac: qcom-ethqos: add support for sa8255p

 .../bindings/net/allwinner,sun7i-a20-gmac.yaml     |   3 +
 .../bindings/net/altr,socfpga-stmmac.yaml          |   3 +
 .../bindings/net/amlogic,meson-dwmac.yaml          |   3 +
 .../devicetree/bindings/net/eswin,eic7700-eth.yaml |   3 +
 .../devicetree/bindings/net/intel,dwmac-plat.yaml  |   3 +
 .../bindings/net/loongson,ls1b-gmac.yaml           |   3 +
 .../bindings/net/loongson,ls1c-emac.yaml           |   3 +
 .../devicetree/bindings/net/nxp,dwmac-imx.yaml     |   3 +
 .../devicetree/bindings/net/nxp,lpc1850-dwmac.yaml |   3 +
 .../devicetree/bindings/net/nxp,s32-dwmac.yaml     |   3 +
 .../devicetree/bindings/net/qcom,ethqos-scmi.yaml  |  97 ++++++
 .../devicetree/bindings/net/qcom,ethqos.yaml       |   3 +
 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml |   3 +
 .../bindings/net/renesas,rzv2h-gbeth.yaml          |   3 +
 .../devicetree/bindings/net/rockchip-dwmac.yaml    |   3 +
 .../devicetree/bindings/net/snps,dwmac.yaml        |   5 +-
 .../bindings/net/sophgo,cv1800b-dwmac.yaml         |   3 +
 .../bindings/net/sophgo,sg2044-dwmac.yaml          |   3 +
 .../bindings/net/starfive,jh7110-dwmac.yaml        |   3 +
 .../devicetree/bindings/net/stm32-dwmac.yaml       |   3 +
 .../devicetree/bindings/net/tesla,fsd-ethqos.yaml  |   3 +
 .../devicetree/bindings/net/thead,th1520-gmac.yaml |   3 +
 .../bindings/net/toshiba,visconti-dwmac.yaml       |   3 +
 MAINTAINERS                                        |   1 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |   2 +-
 .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c    | 342 +++++++++++++++++----
 26 files changed, 447 insertions(+), 63 deletions(-)
---
base-commit: 9823120909776bbca58a3c55ef1f27d49283c1f3
change-id: 20250704-qcom-sa8255p-emac-8460235ac512

Best regards,
-- 
Bartosz Golaszewski <bartosz.golaszewski at linaro.org>