[PATCH] irqchip/sifive-plic: fix call to __plic_toggle in M-Mode code path

[Charles Mirabile]

The code path for M-Mode linux that disables interrupts for other contexts
was missed when refactoring __plic_toggle.

Since the new version caches updates to the state for the primary context,
its use in this codepath is no longer desireable even if it could be made
correct.

Replace the calls to __plic_toggle with a loop that simply disables all of
the interrupts in groups of 32 with a direct mmio write.

Reported-by: kernel test robot <lkp at intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510271316.AQM7gCCy-lkp@intel.com/
Fixes: 14ff9e54dd14 ("irqchip/sifive-plic: Cache the interrupt enable state")

Signed-off-by: Charles Mirabile <cmirabil at redhat.com>
---
 drivers/irqchip/irq-sifive-plic.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index cbd7697bc148..0de3003981f1 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -592,12 +592,12 @@ static int plic_probe(struct fwnode_handle *fwnode)
 		if (parent_hwirq != RV_IRQ_EXT) {
 			/* Disable S-mode enable bits if running in M-mode. */
 			if (IS_ENABLED(CONFIG_RISCV_M_MODE)) {
-				void __iomem *enable_base = priv->regs +
+				u32 __iomem *enable_base = priv->regs +
 					CONTEXT_ENABLE_BASE +
 					i * CONTEXT_ENABLE_SIZE;
 
-				for (hwirq = 1; hwirq <= nr_irqs; hwirq++)
-					__plic_toggle(enable_base, hwirq, 0);
+				for (int j = 0; j <= nr_irqs / 32; j++)
+					writel(0, enable_base + j);
 			}
 			continue;
 		}
-- 
2.43.0