[PATCH 0/3] riscv: dts: spacemit: Add USB 3.0 support for K1

[Ze Huang]

This patch series enables the DWC3 USB 3.0 host controller on the
Spacemit K1 SoC, and enables it for the Banana Pi F3 board.

To make USB 3.0 work on the K1, we need patches for the USB2 PHY [1],
ComboPHY [2], and DWC3 [3] driver, also, ensure enabling the following
configurations:

CONFIG_PHY_SPACEMIT_K1_USB2=y
CONFIG_PHY_SPACEMIT_K1_PCIE=y
CONFIG_USB_DWC3=y
CONFIG_USB_ONBOARD_DEV=y

The series is based on v6.18-rc1.

Link: https://lore.kernel.org/all/20251017-k1-usb2phy-v6-0-7cf9ea2477a1@linux.dev/ [1]
Link: https://lore.kernel.org/all/20251017190740.306780-1-elder@riscstar.com/ [2]
Link: https://github.com/torvalds/linux/commit/e0b6dc00c701 [3]

Thanks,
Ze Huang

Signed-off-by: Ze Huang <huang.ze at linux.dev>
---
Ze Huang (3):
      riscv: dts: spacemit: Add USB2 PHY node for K1
      riscv: dts: spacemit: Add DWC3 USB 3.0 controller node for K1
      riscv: dts: spacemit: Enable USB3.0 on BananaPi-F3

 arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts | 47 +++++++++++++++++++++++++
 arch/riscv/boot/dts/spacemit/k1.dtsi            | 32 +++++++++++++++++
 2 files changed, 79 insertions(+)
---
base-commit: cb6649f6217c0331b885cf787f1d175963e2a1d2
change-id: 20251030-k1-usb3dts-f8e2fb39f879
prerequisite-message-id: <20251017190740.306780-1-elder at riscstar.com>
prerequisite-patch-id: e6c36ae11fd6bb6238b3f256221856869db6958c
prerequisite-patch-id: b7bf3a95a8baaea88d776db7d9e46ced879187a1
prerequisite-patch-id: 893145648925a17c16a5de55bd6952f18e8b7d8e
prerequisite-patch-id: cd96cd9ae2fb4a1f73d34046952dad346823f80d
prerequisite-patch-id: 0baa531df5c47ffe9354ac3885e89bda9ae9b282
prerequisite-patch-id: 3beea086bdfd0ce6ffd011a8906319b1ba253c9c
prerequisite-patch-id: 755e4f791e363ab2f0ac0a4459d0cfd289123800

Best regards,
-- 
Ze Huang <huang.ze at linux.dev>