[PATCH 3/4] riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC

[Inochi Amaoto]

On Fri, May 23, 2025 at 01:20:00PM +0800, Junhui Liu wrote:
> Hi Inochi,
> 
> Thanks for your patch. While testing remoteproc with it, I noticed some
> issues that need correction:
> 
> On 2025/2/9 20:29, Inochi Amaoto wrote:
> > Add reset generator node for all CV18XX series SoC.
> > 
> > Signed-off-by: Inochi Amaoto <inochiama at gmail.com>
> > ---
> >   arch/riscv/boot/dts/sophgo/cv18xx-reset.h | 98 +++++++++++++++++++++++
> >   arch/riscv/boot/dts/sophgo/cv18xx.dtsi    |  7 ++
> >   2 files changed, 105 insertions(+)
> >   create mode 100644 arch/riscv/boot/dts/sophgo/cv18xx-reset.h
> > 
> > diff --git a/arch/riscv/boot/dts/sophgo/cv18xx-reset.h b/arch/riscv/boot/dts/sophgo/cv18xx-reset.h
> > new file mode 100644
> > index 000000000000..3d9aa9ec7e90
> > --- /dev/null
> > +++ b/arch/riscv/boot/dts/sophgo/cv18xx-reset.h
> > @@ -0,0 +1,98 @@
> > +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> > +/*
> > + * Copyright (C) 2025 Inochi Amaoto <inochiama at outlook.com>
> > + */
> > +
> > +#ifndef _SOPHGO_CV18XX_RESET
> > +#define _SOPHGO_CV18XX_RESET
> > +
> > +#define RST_DDR				2
> > +#define RST_H264C			3
> > +#define RST_JPEG			4
> > +#define RST_H265C			5
> > +#define RST_VIPSYS			6
> > +#define RST_TDMA			7
> > +#define RST_TPU				8
> > +#define RST_TPUSYS			9
> > +#define RST_USB				11
> > +#define RST_ETH0			12
> > +#define RST_ETH1			13
> > +#define RST_NAND			14
> > +#define RST_EMMC			15
> > +#define RST_SD0				16
> > +#define RST_SDMA			18
> > +#define RST_I2S0			19
> > +#define RST_I2S1			20
> > +#define RST_I2S2			21
> > +#define RST_I2S3			22
> > +#define RST_UART0			23
> > +#define RST_UART1			24
> > +#define RST_UART2			25
> > +#define RST_UART3			26
> > +#define RST_I2C0			27
> > +#define RST_I2C1			28
> > +#define RST_I2C2			29
> > +#define RST_I2C3			30
> > +#define RST_I2C4			31
> > +#define RST_PWM0			32
> > +#define RST_PWM1			33
> > +#define RST_PWM2			34
> > +#define RST_PWM3			35
> > +#define RST_SPI0			40
> > +#define RST_SPI1			41
> > +#define RST_SPI2			42
> > +#define RST_SPI3			43
> > +#define RST_GPIO0			44
> > +#define RST_GPIO1			45
> > +#define RST_GPIO2			46
> > +#define RST_EFUSE			47
> > +#define RST_WDT				48
> > +#define RST_AHB_ROM			49
> > +#define RST_SPIC			50
> > +#define RST_TEMPSEN			51
> > +#define RST_SARADC			52
> > +#define RST_COMBO_PHY0			58
> > +#define RST_SPI_NAND			61
> > +#define RST_SE				62
> > +#define RST_UART4			74
> > +#define RST_GPIO3			75
> > +#define RST_SYSTEM			76
> > +#define RST_TIMER			77
> > +#define RST_TIMER0			78
> > +#define RST_TIMER1			79
> > +#define RST_TIMER2			80
> > +#define RST_TIMER3			81
> > +#define RST_TIMER4			82
> > +#define RST_TIMER5			83
> > +#define RST_TIMER6			84
> > +#define RST_TIMER7			85
> > +#define RST_WGN0			86
> > +#define RST_WGN1			87
> > +#define RST_WGN2			88
> > +#define RST_KEYSCAN			89
> > +#define RST_AUDDAC			91
> > +#define RST_AUDDAC_APB			92
> > +#define RST_AUDADC			93
> > +#define RST_VCSYS			95
> > +#define RST_ETHPHY			96
> > +#define RST_ETHPHY_APB			97
> > +#define RST_AUDSRC			98
> > +#define RST_VIP_CAM0			99
> > +#define RST_WDT1			100
> > +#define RST_WDT2			101
> > +#define RST_AUTOCLEAR_CPUCORE0		128
> 
> 
> I think here should start from 256.
> 
> > +#define RST_AUTOCLEAR_CPUCORE1		129
> > +#define RST_AUTOCLEAR_CPUCORE2		130
> > +#define RST_AUTOCLEAR_CPUCORE3		131
> > +#define RST_AUTOCLEAR_CPUSYS0		132
> > +#define RST_AUTOCLEAR_CPUSYS1		133
> > +#define RST_AUTOCLEAR_CPUSYS2		134
> > +#define RST_CPUCORE0			160
> 
> And here should start from 288.
> 
> > +#define RST_CPUCORE1			161
> > +#define RST_CPUCORE2			162
> > +#define RST_CPUCORE3			163
> > +#define RST_CPUSYS0			164
> > +#define RST_CPUSYS1			165
> > +#define RST_CPUSYS2			166
> > +

You are right, I will update this patch in the next rc1.
Thanks for testing.

Regards,
Inochi