[PATCH v3 0/4] Add USB2.0 PHY and USB3.0 PHY support for SpacemiT K1
Ze Huang
huangze at whut.edu.cn
Sat May 17 07:25:13 PDT 2025
This patch series introduces support for the USB2.0 PHY and PCIe/USB3.0
Combo PHY on the SpacemiT K1 SoC. The implementation has been tested on the
Milk-V Jupiter and BananaPi-f3.
K1 includes three USB ports as follows[1]:
- A USB2.0 OTG Port
- A USB2.0 Host Only Port
- A USB3.0 Port with a USB2.0 DRD interface
USB3.0 PHY for USB3.0 Port is shared with PCIe port A, meaning that only one of
these interfaces (PCIe or USB3.0) can be active at a given time.
Link: https://developer.spacemit.com/documentation?token=AjHDwrW78igAAEkiHracBI9HnTb#part5 [1]
Signed-off-by: Ze Huang <huangze at whut.edu.cn>
---
Changes in v3:
- improve commit message, provide more info about phy hardware
- drop superfluous local variable in `spacemit_combphy_wait_ready`
- replace devm_reset_control_get with devm_reset_control_get_exclusive
- Link to v2: https://lore.kernel.org/r/20250418-b4-k1-usb3-phy-v2-v2-0-b69e02da84eb@whut.edu.cn
Changes in v2:
- combphy dt-bindings:
- fix reg-names
- describe reg
- describe #phy-cells argument
- drop stale ".owner" in driver struct
- add support for usb lfps_thres in combphy
- fix Kconfig depends on
- Link to v1: https://lore.kernel.org/all/20250407-b4-k1-usb3-v3-2-v1-0-bf0bcc41c9ba@whut.edu.cn
---
Ze Huang (4):
dt-bindings: phy: spacemit: add K1 USB2 PHY
dt-bindings: phy: spacemit: add K1 PCIe/USB3 combo PHY
phy: spacemit: support K1 USB2.0 PHY controller
phy: spacemit: add USB3 support for K1 PCIe/USB3 combo PHY
.../bindings/phy/spacemit,k1-combphy.yaml | 72 ++++++
.../devicetree/bindings/phy/spacemit,usb2-phy.yaml | 40 ++++
drivers/phy/Kconfig | 1 +
drivers/phy/Makefile | 1 +
drivers/phy/spacemit/Kconfig | 21 ++
drivers/phy/spacemit/Makefile | 3 +
drivers/phy/spacemit/phy-k1-combphy.c | 248 +++++++++++++++++++++
drivers/phy/spacemit/phy-k1-usb2.c | 131 +++++++++++
8 files changed, 517 insertions(+)
---
base-commit: 64e9fdfc89a76fed38d8ddeed72d42ec71957ed9
change-id: 20250417-b4-k1-usb3-phy-v2-fb1e41849049
Best regards,
--
Ze Huang <huangze at whut.edu.cn>
More information about the linux-riscv
mailing list