[PATCH] riscv: dts: starfive: jh7110-common: use macros for MMC0 pins

[Emil Renner Berthing]

Icenowy Zheng wrote:
> The pin names of MMC0 pinmux is defined in the pinctrl dt binding header
> associated with starfive,jh7110-pinctrl .
>
> Include the header file and use these names instead of raw numbers for
> defining MMC0 pinmux.
>
> Signed-off-by: Icenowy Zheng <uwu at icenowy.me>

This looks good to me:
Reviewed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

Looking at this doesn't the contents of
arch/riscv/boot/dts/starfive/jh7110-pinfunc.h also belong in
include/dt-bindings/pinctrl/starfive,jh7110-pinctrl.h
or am I missing something?

/Emil
> ---
> This is only a prettying commit. The resulting DTB files have the same
> content with or without this patch (verified by doing sha256sum on
> arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb).
>
>  .../boot/dts/starfive/jh7110-common.dtsi      | 21 ++++++++++---------
>  1 file changed, 11 insertions(+), 10 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index c2f70f5e2918f..a2c72b385a905 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -8,6 +8,7 @@
>  #include "jh7110.dtsi"
>  #include "jh7110-pinfunc.h"
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
>
>  / {
>  	aliases {
> @@ -428,16 +429,16 @@ GPOEN_ENABLE,
>  		};
>
>  		mmc-pins {
> -			pinmux = <PINMUX(64, 0)>,
> -				 <PINMUX(65, 0)>,
> -				 <PINMUX(66, 0)>,
> -				 <PINMUX(67, 0)>,
> -				 <PINMUX(68, 0)>,
> -				 <PINMUX(69, 0)>,
> -				 <PINMUX(70, 0)>,
> -				 <PINMUX(71, 0)>,
> -				 <PINMUX(72, 0)>,
> -				 <PINMUX(73, 0)>;
> +			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
> +				 <PINMUX(PAD_SD0_CMD, 0)>,
> +				 <PINMUX(PAD_SD0_DATA0, 0)>,
> +				 <PINMUX(PAD_SD0_DATA1, 0)>,
> +				 <PINMUX(PAD_SD0_DATA2, 0)>,
> +				 <PINMUX(PAD_SD0_DATA3, 0)>,
> +				 <PINMUX(PAD_SD0_DATA4, 0)>,
> +				 <PINMUX(PAD_SD0_DATA5, 0)>,
> +				 <PINMUX(PAD_SD0_DATA6, 0)>,
> +				 <PINMUX(PAD_SD0_DATA7, 0)>;
>  			bias-pull-up;
>  			drive-strength = <12>;
>  			input-enable;
> --
> 2.49.0
>