[PATCH v2 RESEND] riscv: dts: starfive: fml13v01: enable USB 3.0 port

[Emil Renner Berthing]

Conor Dooley wrote:
> On Mon, Mar 24, 2025 at 10:09:58AM +0800, Sandie Cao wrote:
> > Add usb_cdns3 and usb0_pins configuration to support super speed USB
> > device on the FML13V01 board.
> >
> > Signed-off-by: Sandie Cao <sandie.cao at deepcomputing.io>
> > Tested-by: Maud Spierings <maud_spierings at hotmail.com>
>
> Emil, can I grab this one?

Yes, please do.

Reviewed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

>
> > ---
> >
> > Changes in v2:
> > - Remove space to pass checkpatch.pl.
> > - Add usb0_pins and pass test on board.
> >
> >  .../jh7110-deepcomputing-fml13v01.dts         | 19 +++++++++++++++++++
> >  1 file changed, 19 insertions(+)
> >
> > diff --git a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
> > index 8d9ce8b69a71..f2857d021d68 100644
> > --- a/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
> > +++ b/arch/riscv/boot/dts/starfive/jh7110-deepcomputing-fml13v01.dts
> > @@ -43,9 +43,28 @@ GPOEN_DISABLE,
> >  			slew-rate = <0>;
> >  		};
> >  	};
> > +
> > +	usb0_pins: usb0-0 {
> > +		vbus-pins {
> > +			pinmux = <GPIOMUX(25,  GPOUT_SYS_USB_DRIVE_VBUS,
> > +					       GPOEN_ENABLE,
> > +					       GPI_NONE)>;
> > +			bias-disable;
> > +			input-disable;
> > +			input-schmitt-disable;
> > +			slew-rate = <0>;
> > +		};
> > +	};
> >  };
> >
> >  &usb0 {
> >  	dr_mode = "host";
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&usb0_pins>;
> >  	status = "okay";
> >  };
> > +
> > +&usb_cdns3 {
> > +	phys = <&usbphy0>, <&pciephy0>;
> > +	phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
> > +};
> >
> > base-commit: 38818f7c9c179351334b1faffc4d40bd28cc9c72
> > --
> > 2.34.1