[PATCH v3 2/2] reset: canaan: add reset driver for Kendryte K230
Junhui Liu
junhui.liu at pigmoral.tech
Wed May 7 06:25:34 PDT 2025
Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets.
Signed-off-by: Junhui Liu <junhui.liu at pigmoral.tech>
---
drivers/reset/Kconfig | 9 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-k230.c | 371 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 381 insertions(+)
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 99f6f9784e6865faddf8621ccfca095778c4dc47..248138ffba3bfbf859c74ba1aed7ba2f72819f7a 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -140,6 +140,15 @@ config RESET_K210
Say Y if you want to control reset signals provided by this
controller.
+config RESET_K230
+ tristate "Reset controller driver for Canaan Kendryte K230 SoC"
+ depends on ARCH_CANAAN || COMPILE_TEST
+ depends on OF
+ help
+ Support for the Canaan Kendryte K230 RISC-V SoC reset controller.
+ Say Y if you want to control reset signals provided by this
+ controller.
+
config RESET_LANTIQ
bool "Lantiq XWAY Reset Driver" if COMPILE_TEST
default SOC_TYPE_XWAY
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 31f9904d13f9c3a107fc1ee1ec9f9baba016d101..13fe94531bea1eb91268b1804e1321b167815a4b 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_IMX8MP_AUDIOMIX) += reset-imx8mp-audiomix.o
obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o
obj-$(CONFIG_RESET_K210) += reset-k210.o
+obj-$(CONFIG_RESET_K230) += reset-k230.o
obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o
diff --git a/drivers/reset/reset-k230.c b/drivers/reset/reset-k230.c
new file mode 100644
index 0000000000000000000000000000000000000000..c81045bb4a142af7eb5ab648f04d04cc95919255
--- /dev/null
+++ b/drivers/reset/reset-k230.c
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2022-2024 Canaan Bright Sight Co., Ltd
+ * Copyright (C) 2024-2025 Junhui Liu <junhui.liu at pigmoral.tech>
+ *
+ * The reset management module in the K230 SoC provides reset time control
+ * registers. For RST_TYPE_CPU0, RST_TYPE_CPU1 and RST_TYPE_SW_DONE, the period
+ * during which reset is applied or removed while the clock is stopped can be
+ * set up to 15 * 0.25 = 3.75 µs. For RST_TYPE_HW_DONE, that period can be set
+ * up to 255 * 0.25 = 63.75 µs. For RST_TYPE_FLUSH, the reset bit is
+ * automatically cleared by hardware when flush completes.
+ *
+ * Although this driver does not configure the reset time registers, delays have
+ * been added to the assert, deassert, and reset operations to cover the maximum
+ * reset time. Some reset types include done bits whose toggle does not
+ * unambiguously signal whether hardware reset removal or clock-stop period
+ * expiration occurred first. Delays are therefore retained for types with done
+ * bits to ensure safe timing.
+ *
+ * Reference: K230 Technical Reference Manual V0.3.1
+ * https://kendryte-download.canaan-creative.com/developer/k230/HDK/K230%E7%A1%AC%E4%BB%B6%E6%96%87%E6%A1%A3/K230_Technical_Reference_Manual_V0.3.1_20241118.pdf
+ */
+
+#include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/spinlock.h>
+
+#include <dt-bindings/reset/canaan,k230-rst.h>
+
+/**
+ * enum k230_rst_type - K230 reset types
+ * @RST_TYPE_CPU0: Reset type for CPU0
+ * Automatically clears, has write enable and done bit, active high
+ * @RST_TYPE_CPU1: Reset type for CPU1
+ * Manually clears, has write enable and done bit, active high
+ * @RST_TYPE_FLUSH: Reset type for CPU L2 cache flush
+ * Automatically clears, has write enable, no done bit, active high
+ * @RST_TYPE_HW_DONE: Reset type for hardware auto clear
+ * Automatically clears, no write enable, has done bit, active high
+ * @RST_TYPE_SW_DONE: Reset type for software manual clear
+ * Manually clears, no write enable and done bit,
+ * active high if ID is RST_SPI2AXI, otherwise active low
+ */
+enum k230_rst_type {
+ RST_TYPE_CPU0,
+ RST_TYPE_CPU1,
+ RST_TYPE_FLUSH,
+ RST_TYPE_HW_DONE,
+ RST_TYPE_SW_DONE,
+};
+
+struct k230_rst_map {
+ u32 offset;
+ enum k230_rst_type type;
+ u32 done;
+ u32 reset;
+};
+
+struct k230_rst {
+ struct reset_controller_dev rcdev;
+ void __iomem *base;
+ /* protect register read-modify-write */
+ spinlock_t lock;
+};
+
+static const struct k230_rst_map k230_resets[] = {
+ [RST_CPU0] = { 0x4, RST_TYPE_CPU0, BIT(12), BIT(0) },
+ [RST_CPU1] = { 0xc, RST_TYPE_CPU1, BIT(12), BIT(0) },
+ [RST_CPU0_FLUSH] = { 0x4, RST_TYPE_FLUSH, 0, BIT(4) },
+ [RST_CPU1_FLUSH] = { 0xc, RST_TYPE_FLUSH, 0, BIT(4) },
+ [RST_AI] = { 0x14, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_VPU] = { 0x1c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_HISYS] = { 0x2c, RST_TYPE_HW_DONE, BIT(4), BIT(0) },
+ [RST_HISYS_AHB] = { 0x2c, RST_TYPE_HW_DONE, BIT(5), BIT(1) },
+ [RST_SDIO0] = { 0x34, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SDIO1] = { 0x34, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_SDIO_AXI] = { 0x34, RST_TYPE_HW_DONE, BIT(30), BIT(2) },
+ [RST_USB0] = { 0x3c, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_USB1] = { 0x3c, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_USB0_AHB] = { 0x3c, RST_TYPE_HW_DONE, BIT(30), BIT(0) },
+ [RST_USB1_AHB] = { 0x3c, RST_TYPE_HW_DONE, BIT(31), BIT(1) },
+ [RST_SPI0] = { 0x44, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SPI1] = { 0x44, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_SPI2] = { 0x44, RST_TYPE_HW_DONE, BIT(30), BIT(2) },
+ [RST_SEC] = { 0x4c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_PDMA] = { 0x54, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SDMA] = { 0x54, RST_TYPE_HW_DONE, BIT(29), BIT(1) },
+ [RST_DECOMPRESS] = { 0x5c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_SRAM] = { 0x64, RST_TYPE_HW_DONE, BIT(28), BIT(0) },
+ [RST_SHRM_AXIM] = { 0x64, RST_TYPE_HW_DONE, BIT(30), BIT(2) },
+ [RST_SHRM_AXIS] = { 0x64, RST_TYPE_HW_DONE, BIT(31), BIT(3) },
+ [RST_NONAI2D] = { 0x6c, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_MCTL] = { 0x74, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_ISP] = { 0x80, RST_TYPE_HW_DONE, BIT(29), BIT(6) },
+ [RST_ISP_DW] = { 0x80, RST_TYPE_HW_DONE, BIT(28), BIT(5) },
+ [RST_DPU] = { 0x88, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_DISP] = { 0x90, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_GPU] = { 0x98, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_AUDIO] = { 0xa4, RST_TYPE_HW_DONE, BIT(31), BIT(0) },
+ [RST_TIMER0] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(0) },
+ [RST_TIMER1] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_TIMER2] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(2) },
+ [RST_TIMER3] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(3) },
+ [RST_TIMER4] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(4) },
+ [RST_TIMER5] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(5) },
+ [RST_TIMER_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(6) },
+ [RST_HDI] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(7) },
+ [RST_WDT0] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(12) },
+ [RST_WDT1] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(13) },
+ [RST_WDT0_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(14) },
+ [RST_WDT1_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(15) },
+ [RST_TS_APB] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(16) },
+ [RST_MAILBOX] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(17) },
+ [RST_STC] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(18) },
+ [RST_PMU] = { 0x20, RST_TYPE_SW_DONE, 0, BIT(19) },
+ [RST_LOSYS_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(0) },
+ [RST_UART0] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_UART1] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(2) },
+ [RST_UART2] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(3) },
+ [RST_UART3] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(4) },
+ [RST_UART4] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(5) },
+ [RST_I2C0] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(6) },
+ [RST_I2C1] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(7) },
+ [RST_I2C2] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(8) },
+ [RST_I2C3] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(9) },
+ [RST_I2C4] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(10) },
+ [RST_JAMLINK0_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(11) },
+ [RST_JAMLINK1_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(12) },
+ [RST_JAMLINK2_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(13) },
+ [RST_JAMLINK3_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(14) },
+ [RST_CODEC_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(17) },
+ [RST_GPIO_DB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(18) },
+ [RST_GPIO_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(19) },
+ [RST_ADC] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(20) },
+ [RST_ADC_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(21) },
+ [RST_PWM_APB] = { 0x24, RST_TYPE_SW_DONE, 0, BIT(22) },
+ [RST_SHRM_APB] = { 0x64, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_CSI0] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(0) },
+ [RST_CSI1] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(1) },
+ [RST_CSI2] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(2) },
+ [RST_CSI_DPHY] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(3) },
+ [RST_ISP_AHB] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(4) },
+ [RST_M0] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(7) },
+ [RST_M1] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(8) },
+ [RST_M2] = { 0x80, RST_TYPE_SW_DONE, 0, BIT(9) },
+ [RST_SPI2AXI] = { 0xa8, RST_TYPE_SW_DONE, 0, BIT(0) }
+};
+
+static inline struct k230_rst *to_k230_rst(struct reset_controller_dev *rcdev)
+{
+ return container_of(rcdev, struct k230_rst, rcdev);
+}
+
+static void k230_rst_clear_done(struct k230_rst *rstc, unsigned long id,
+ bool write_en)
+{
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ u32 reg;
+
+ guard(spinlock_irqsave)(&rstc->lock);
+
+ reg = readl(rstc->base + rmap->offset);
+ reg |= rmap->done; /* write 1 to clear */
+ if (write_en)
+ reg |= rmap->done << 16;
+ writel(reg, rstc->base + rmap->offset);
+}
+
+static int k230_rst_wait_and_clear_done(struct k230_rst *rstc, unsigned long id,
+ bool write_en)
+{
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ u32 reg;
+ int ret;
+
+ ret = readl_poll_timeout(rstc->base + rmap->offset, reg,
+ reg & rmap->done, 10, 1000);
+ if (ret) {
+ dev_err(rstc->rcdev.dev, "Wait for reset done timeout\n");
+ return ret;
+ }
+
+ k230_rst_clear_done(rstc, id, write_en);
+
+ return 0;
+}
+
+static void k230_rst_update(struct k230_rst *rstc, unsigned long id,
+ bool assert, bool write_en, bool active_low)
+{
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ u32 reg;
+
+ guard(spinlock_irqsave)(&rstc->lock);
+
+ reg = readl(rstc->base + rmap->offset);
+ if (assert ^ active_low)
+ reg |= rmap->reset;
+ else
+ reg &= ~rmap->reset;
+ if (write_en)
+ reg |= rmap->reset << 16;
+ writel(reg, rstc->base + rmap->offset);
+}
+
+static int k230_rst_assert(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct k230_rst *rstc = to_k230_rst(rcdev);
+
+ switch (k230_resets[id].type) {
+ case RST_TYPE_CPU1:
+ k230_rst_update(rstc, id, true, true, false);
+ break;
+ case RST_TYPE_SW_DONE:
+ k230_rst_update(rstc, id, true, false,
+ id == RST_SPI2AXI ? false : true);
+ break;
+ case RST_TYPE_CPU0:
+ case RST_TYPE_FLUSH:
+ case RST_TYPE_HW_DONE:
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * The time period when reset is applied but the clock is stopped for
+ * RST_TYPE_CPU1 and RST_TYPE_SW_DONE can be set up to 3.75us. Delay
+ * 10us to ensure proper reset timing.
+ */
+ udelay(10);
+
+ return 0;
+}
+
+static int k230_rst_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct k230_rst *rstc = to_k230_rst(rcdev);
+ int ret = 0;
+
+ switch (k230_resets[id].type) {
+ case RST_TYPE_CPU1:
+ k230_rst_update(rstc, id, false, true, false);
+ ret = k230_rst_wait_and_clear_done(rstc, id, true);
+ break;
+ case RST_TYPE_SW_DONE:
+ k230_rst_update(rstc, id, false, false,
+ id == RST_SPI2AXI ? false : true);
+ break;
+ case RST_TYPE_CPU0:
+ case RST_TYPE_FLUSH:
+ case RST_TYPE_HW_DONE:
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * The time period when reset is removed but the clock is stopped for
+ * RST_TYPE_CPU1 and RST_TYPE_SW_DONE can be set up to 3.75us. Delay
+ * 10us to ensure proper reset timing.
+ */
+ udelay(10);
+
+ return ret;
+}
+
+static int k230_rst_reset(struct reset_controller_dev *rcdev, unsigned long id)
+{
+ struct k230_rst *rstc = to_k230_rst(rcdev);
+ const struct k230_rst_map *rmap = &k230_resets[id];
+ u32 reg;
+ int ret = 0;
+
+ switch (rmap->type) {
+ case RST_TYPE_CPU0:
+ k230_rst_clear_done(rstc, id, true);
+ k230_rst_update(rstc, id, true, true, false);
+ ret = k230_rst_wait_and_clear_done(rstc, id, true);
+
+ /*
+ * The time period when reset is applied and removed but the
+ * clock is stopped for RST_TYPE_CPU0 can be set up to 7.5us.
+ * Delay 10us to ensure proper reset timing.
+ */
+ udelay(10);
+
+ break;
+ case RST_TYPE_FLUSH:
+ k230_rst_update(rstc, id, true, true, false);
+
+ /* Wait flush request bit auto cleared by hardware */
+ ret = readl_poll_timeout(rstc->base + rmap->offset, reg,
+ !(reg & rmap->reset), 10, 1000);
+ if (ret)
+ dev_err(rcdev->dev, "Wait for flush done timeout\n");
+
+ break;
+ case RST_TYPE_HW_DONE:
+ k230_rst_clear_done(rstc, id, false);
+ k230_rst_update(rstc, id, true, false, false);
+ ret = k230_rst_wait_and_clear_done(rstc, id, false);
+
+ /*
+ * The time period when reset is applied and removed but the
+ * clock is stopped for RST_TYPE_HW_DONE can be set up to
+ * 127.5us. Delay 200us to ensure proper reset timing.
+ */
+ fsleep(200);
+
+ break;
+ case RST_TYPE_CPU1:
+ case RST_TYPE_SW_DONE:
+ k230_rst_assert(rcdev, id);
+ ret = k230_rst_deassert(rcdev, id);
+ break;
+ }
+
+ return ret;
+}
+
+static const struct reset_control_ops k230_rst_ops = {
+ .reset = k230_rst_reset,
+ .assert = k230_rst_assert,
+ .deassert = k230_rst_deassert,
+};
+
+static int k230_rst_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct k230_rst *rstc;
+
+ rstc = devm_kzalloc(dev, sizeof(*rstc), GFP_KERNEL);
+ if (!rstc)
+ return -ENOMEM;
+
+ rstc->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(rstc->base))
+ return PTR_ERR(rstc->base);
+
+ spin_lock_init(&rstc->lock);
+
+ rstc->rcdev.dev = dev;
+ rstc->rcdev.owner = THIS_MODULE;
+ rstc->rcdev.ops = &k230_rst_ops;
+ rstc->rcdev.nr_resets = ARRAY_SIZE(k230_resets);
+ rstc->rcdev.of_node = dev->of_node;
+
+ return devm_reset_controller_register(dev, &rstc->rcdev);
+}
+
+static const struct of_device_id k230_rst_match[] = {
+ { .compatible = "canaan,k230-rst", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, k230_rst_match);
+
+static struct platform_driver k230_rst_driver = {
+ .probe = k230_rst_probe,
+ .driver = {
+ .name = "k230-rst",
+ .of_match_table = k230_rst_match,
+ }
+};
+module_platform_driver(k230_rst_driver);
+
+MODULE_AUTHOR("Junhui Liu <junhui.liu at pigmoral.tech>");
+MODULE_DESCRIPTION("Canaan K230 reset driver");
+MODULE_LICENSE("GPL");
--
2.49.0
More information about the linux-riscv
mailing list