[PATCH v6 5/6] reset: spacemit: define three more CCUs
Alex Elder
elder at riscstar.com
Tue May 6 14:06:36 PDT 2025
Three more CCUs on the SpacemiT K1 SoC implement only resets, not clocks.
Define these resets so they can be used.
Signed-off-by: Alex Elder <elder at riscstar.com>
---
drivers/clk/spacemit/ccu-k1.c | 24 ++++++++++++++++
drivers/reset/spacemit/k1.c | 54 +++++++++++++++++++++++++++++++++++
include/soc/spacemit/ccu_k1.h | 30 +++++++++++++++++++
3 files changed, 108 insertions(+)
diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 6b1845e899e5f..bddc83aff23cd 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -939,6 +939,18 @@ static const struct spacemit_ccu_data k1_ccu_apmu_data = {
.num = ARRAY_SIZE(k1_ccu_apmu_hws),
};
+static const struct spacemit_ccu_data k1_ccu_rcpu_data = {
+ .reset_name = "rcpu-reset",
+};
+
+static const struct spacemit_ccu_data k1_ccu_rcpu2_data = {
+ .reset_name = "rcpu2-reset",
+};
+
+static const struct spacemit_ccu_data k1_ccu_apbc2_data = {
+ .reset_name = "apbc2-reset",
+};
+
static int spacemit_ccu_register(struct device *dev,
struct regmap *regmap,
struct regmap *lock_regmap,
@@ -1106,6 +1118,18 @@ static const struct of_device_id of_k1_ccu_match[] = {
.compatible = "spacemit,k1-syscon-apmu",
.data = &k1_ccu_apmu_data,
},
+ {
+ .compatible = "spacemit,k1-syscon-rcpu",
+ .data = &k1_ccu_rcpu_data,
+ },
+ {
+ .compatible = "spacemit,k1-syscon-rcpu2",
+ .data = &k1_ccu_rcpu2_data,
+ },
+ {
+ .compatible = "spacemit,k1-syscon-apbc2",
+ .data = &k1_ccu_apbc2_data,
+ },
{ }
};
MODULE_DEVICE_TABLE(of, of_k1_ccu_match);
diff --git a/drivers/reset/spacemit/k1.c b/drivers/reset/spacemit/k1.c
index 19a34f151b214..27434a1928261 100644
--- a/drivers/reset/spacemit/k1.c
+++ b/drivers/reset/spacemit/k1.c
@@ -137,6 +137,57 @@ static const struct ccu_reset_controller_data k1_apmu_reset_data = {
.count = ARRAY_SIZE(apmu_resets),
};
+static const struct ccu_reset_data rcpu_resets[] = {
+ [RESET_RCPU_SSP0] = RESET_DATA(RCPU_SSP0_CLK_RST, 0, BIT(0)),
+ [RESET_RCPU_I2C0] = RESET_DATA(RCPU_I2C0_CLK_RST, 0, BIT(0)),
+ [RESET_RCPU_UART1] = RESET_DATA(RCPU_UART1_CLK_RST, 0, BIT(0)),
+ [RESET_RCPU_IR] = RESET_DATA(RCPU_CAN_CLK_RST, 0, BIT(0)),
+ [RESET_RCPU_CAN] = RESET_DATA(RCPU_IR_CLK_RST, 0, BIT(0)),
+ [RESET_RCPU_UART0] = RESET_DATA(RCPU_UART0_CLK_RST, 0, BIT(0)),
+ [RESET_RCPU_HDMI_AUDIO] = RESET_DATA(AUDIO_HDMI_CLK_CTRL, 0, BIT(0)),
+};
+
+static const struct ccu_reset_controller_data k1_rcpu_reset_data = {
+ /* No clocks in the RCPU CCU */
+ .reset_data = rcpu_resets,
+ .count = ARRAY_SIZE(rcpu_resets),
+};
+
+static const struct ccu_reset_data rcpu2_resets[] = {
+ [RESET_RCPU2_PWM0] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM1] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM2] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM3] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM4] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM5] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM6] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM7] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM8] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+ [RESET_RCPU2_PWM9] = RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+};
+
+static const struct ccu_reset_controller_data k1_rcpu2_reset_data = {
+ /* No clocks in the RCPU2 CCU */
+ .reset_data = rcpu2_resets,
+ .count = ARRAY_SIZE(rcpu2_resets),
+};
+
+static const struct ccu_reset_data apbc2_resets[] = {
+ [RESET_APBC2_UART1] = RESET_DATA(APBC2_UART1_CLK_RST, BIT(2), 0),
+ [RESET_APBC2_SSP2] = RESET_DATA(APBC2_SSP2_CLK_RST, BIT(2), 0),
+ [RESET_APBC2_TWSI3] = RESET_DATA(APBC2_TWSI3_CLK_RST, BIT(2), 0),
+ [RESET_APBC2_RTC] = RESET_DATA(APBC2_RTC_CLK_RST, BIT(2), 0),
+ [RESET_APBC2_TIMERS0] = RESET_DATA(APBC2_TIMERS0_CLK_RST, BIT(2), 0),
+ [RESET_APBC2_KPC] = RESET_DATA(APBC2_KPC_CLK_RST, BIT(2), 0),
+ [RESET_APBC2_GPIO] = RESET_DATA(APBC2_GPIO_CLK_RST, BIT(2), 0),
+};
+
+static const struct ccu_reset_controller_data k1_apbc2_reset_data = {
+ /* No clocks in the APBC2 CCU */
+ .reset_data = apbc2_resets,
+ .count = ARRAY_SIZE(apbc2_resets),
+};
+
static int spacemit_k1_reset_probe(struct auxiliary_device *adev,
const struct auxiliary_device_id *id)
{
@@ -164,6 +215,9 @@ static const struct auxiliary_device_id spacemit_k1_reset_ids[] = {
K1_AUX_DEV_ID(mpmu),
K1_AUX_DEV_ID(apbc),
K1_AUX_DEV_ID(apmu),
+ K1_AUX_DEV_ID(rcpu),
+ K1_AUX_DEV_ID(rcpu2),
+ K1_AUX_DEV_ID(apbc2),
{ },
};
MODULE_DEVICE_TABLE(auxiliary, spacemit_k1_reset_ids);
diff --git a/include/soc/spacemit/ccu_k1.h b/include/soc/spacemit/ccu_k1.h
index 8b2581fb3055d..66035012317c9 100644
--- a/include/soc/spacemit/ccu_k1.h
+++ b/include/soc/spacemit/ccu_k1.h
@@ -123,3 +123,33 @@ to_spacemit_ccu_adev(struct auxiliary_device *adev)
#define APMU_PCIE_CLK_RES_CTRL_2 0x3dc
#define APMU_EMAC0_CLK_RES_CTRL 0x3e4
#define APMU_EMAC1_CLK_RES_CTRL 0x3ec
+
+/* RCPU register offsets */
+#define RCPU_SSP0_CLK_RST 0x0028
+#define RCPU_I2C0_CLK_RST 0x0030
+#define RCPU_UART1_CLK_RST 0x003c
+#define RCPU_CAN_CLK_RST 0x0048
+#define RCPU_IR_CLK_RST 0x004c
+#define RCPU_UART0_CLK_RST 0x00d8
+#define AUDIO_HDMI_CLK_CTRL 0x2044
+
+/* RCPU2 register offsets */
+#define RCPU2_PWM0_CLK_RST 0x0000
+#define RCPU2_PWM1_CLK_RST 0x0004
+#define RCPU2_PWM2_CLK_RST 0x0008
+#define RCPU2_PWM3_CLK_RST 0x000c
+#define RCPU2_PWM4_CLK_RST 0x0010
+#define RCPU2_PWM5_CLK_RST 0x0014
+#define RCPU2_PWM6_CLK_RST 0x0018
+#define RCPU2_PWM7_CLK_RST 0x001c
+#define RCPU2_PWM8_CLK_RST 0x0020
+#define RCPU2_PWM9_CLK_RST 0x0024
+
+/* APBC2 register offsets */
+#define APBC2_UART1_CLK_RST 0x0000
+#define APBC2_SSP2_CLK_RST 0x0004
+#define APBC2_TWSI3_CLK_RST 0x0008
+#define APBC2_RTC_CLK_RST 0x000c
+#define APBC2_TIMERS0_CLK_RST 0x0010
+#define APBC2_KPC_CLK_RST 0x0014
+#define APBC2_GPIO_CLK_RST 0x001c
--
2.45.2
More information about the linux-riscv
mailing list