[PATCH v2 1/2] serial: sifive: lock port in startup()/shutdown() callbacks

[Ryo Takakura]

startup()/shutdown() callbacks access SIFIVE_SERIAL_IE_OFFS.
The register is also accessed from write() callback.

If console were printing and startup()/shutdown() callback
gets called, its access to the register could be overwritten.

Add port->lock to startup()/shutdown() callbacks to make sure
their access to SIFIVE_SERIAL_IE_OFFS is synchronized against
write() callback.

Signed-off-by: Ryo Takakura <ryotkkr98 at gmail.com>
---
 drivers/tty/serial/sifive.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/tty/serial/sifive.c b/drivers/tty/serial/sifive.c
index 5904a2d4c..054a8e630 100644
--- a/drivers/tty/serial/sifive.c
+++ b/drivers/tty/serial/sifive.c
@@ -563,8 +563,11 @@ static void sifive_serial_break_ctl(struct uart_port *port, int break_state)
 static int sifive_serial_startup(struct uart_port *port)
 {
 	struct sifive_serial_port *ssp = port_to_sifive_serial_port(port);
+	unsigned long flags;
 
+	uart_port_lock_irqsave(&ssp->port, &flags);
 	__ssp_enable_rxwm(ssp);
+	uart_port_unlock_irqrestore(&ssp->port, flags);
 
 	return 0;
 }
@@ -572,9 +575,12 @@ static int sifive_serial_startup(struct uart_port *port)
 static void sifive_serial_shutdown(struct uart_port *port)
 {
 	struct sifive_serial_port *ssp = port_to_sifive_serial_port(port);
+	unsigned long flags;
 
+	uart_port_lock_irqsave(&ssp->port, &flags);
 	__ssp_disable_rxwm(ssp);
 	__ssp_disable_txwm(ssp);
+	uart_port_unlock_irqrestore(&ssp->port, flags);
 }
 
 /**
-- 
2.34.1