[PATCH RESEND 7/7] riscv: dts: spacemit: add reset support for the K1 SoC

[Alex Elder]

On 3/22/25 11:48 AM, Yixun Lan wrote:
> On 10:18 Fri 21 Mar     , Alex Elder wrote:
>> Define syscon nodes for the RCPU, RCPU2, and APBC2 SpacemiT CCUS, which
>> currently support resets but not clocks in the SpacemiT K1.
>>
>> Signed-off-by: Alex Elder <elder at riscstar.com>
>> ---
>>   arch/riscv/boot/dts/spacemit/k1.dtsi | 18 ++++++++++++++++++
>>   1 file changed, 18 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
>> index 09a9100986b19..f86d1b58c6d35 100644
>> --- a/arch/riscv/boot/dts/spacemit/k1.dtsi
>> +++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
>> @@ -350,6 +350,18 @@ soc {
>>   		dma-noncoherent;
>>   		ranges;
>>   
>> +		syscon_rcpu: system-controller at c0880000 {
> I'm not sure if syscon_rcpu is good name to go, it's AUDIO Peripherals
> in docs, see
> 
> 7.2 Main CPU Domain Address Mapping
> https://developer.spacemit.com/documentation?token=LzJyw97BCipK1dkUygrcbT0NnMg

They call it "AUD_MCUSYSCTRL section <RCPU(0xC0880000)>",
where the registers layouts are defined, and the register
names use the "RCPU" prefix by convention.

I guess I could use "AUDIO" instead, but I think it's
"RCPU" is a little better because of the way things in
the region are named.  It's a little like how "pll" is
used for the DT node name for things in the "APBS" region.
I don't really like that, because the connection between
the two isn't very clear.

>> +			compatible = "spacemit,k1-syscon-rcpu";
>> +			reg = <0x0 0xc0880000 0x0 0x2048>;
>> +			#reset-cells = <1>;
>> +		};
>> +
>> +		syscon_rcpu2: system-controller at c0888000 {
> not found this address mapping in above docs link

You're right.  I was following what the downstream code did.
I'll gladly just include this in the main "RCPU" node.

Thank you very much for the review Yixun.

					-Alex

>> +			compatible = "spacemit,k1-syscon-rcpu2";
>> +			reg = <0x0 0xc0888000 0x0 0x28>;
>> +			#reset-cells = <1>;
>> +		};
>> +
>>   		syscon_apbc: system-control at d4015000 {
>>   			compatible = "spacemit,k1-syscon-apbc";
>>   			reg = <0x0 0xd4015000 0x0 0x1000>;
>> @@ -518,6 +530,12 @@ clint: timer at e4000000 {
>>   					      <&cpu7_intc 3>, <&cpu7_intc 7>;
>>   		};
>>   
>> +		syscon_apbc2: system-controller at f0610000 {
>> +			compatible = "spacemit,k1-syscon-apbc2";
>> +			reg = <0x0 0xf0610000 0x0 0x20>;
>> +			#reset-cells = <1>;
>> +		};
>> +
>>   		sec_uart1: serial at f0612000 {
>>   			compatible = "spacemit,k1-uart", "intel,xscale-uart";
>>   			reg = <0x0 0xf0612000 0x0 0x100>;
>> -- 
>> 2.43.0
>>
>