[PATCH v6 0/8] spacemit: introduce P1 PMIC support

Alex Elder elder at riscstar.com
Fri Jun 27 07:22:59 PDT 2025


The SpacemiT P1 is an I2C-controlled PMIC that implements 6 buck
converters and 12 LDOs.  It contains a load switch, ADC channels,
GPIOs, a real-time clock, and a watchdog timer.

This series introduces a multifunction driver for the P1 PMIC as well
as drivers for its regulators and RTC.

This version adds a new patch to change the simple MFD driver as
suggested by Lee Jones.  Rather than specifying a full regmap config
for each simple MFD, specify the max_register value desired in the
simple_mfd_data structure.  That supports all existing devices (which
don't use the regmap_config option), as well as the SpacemiT P1
(which specifies the max_register).

					-Alex

This series is available here:
  https://github.com/riscstar/linux/tree/outgoing/pmic-v6

Between version 5 and version 6:
  - Added Rob Herring's reviewed-by to patch 1
  - Add the simple MFD functionality suggested by Lee Jones
  - Update patch 3 (previously 2) accordingly

Here is version 5 of this series:
  https://lore.kernel.org/lkml/20250625164119.1068842-1-elder@riscstar.com/

Between version 4 and version 5:
  - Only check the seconds register for change when looping on read
  - Return without re-enabling the RTC if writing registers fails
  - If the RTC is disabled when reading, return an error

Here is version 4 of this series:
  https://lore.kernel.org/lkml/20250625164119.1068842-1-elder@riscstar.com/

More complete history is available at that link.

Alex Elder (8):
  dt-bindings: mfd: add support the SpacemiT P1 PMIC
  mfd: simple-mfd-i2c: specify max_register
  mfd: simple-mfd-i2c: add SpacemiT P1 support
  regulator: spacemit: support SpacemiT P1 regulators
  rtc: spacemit: support the SpacemiT P1 RTC
  riscv: dts: spacemit: enable the i2c8 adapter
  riscv: dts: spacemit: define fixed regulators
  riscv: dts: spacemit: define regulator constraints

 .../devicetree/bindings/mfd/spacemit,p1.yaml  |  86 +++++++++
 .../boot/dts/spacemit/k1-bananapi-f3.dts      | 138 +++++++++++++++
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi  |   7 +
 arch/riscv/boot/dts/spacemit/k1.dtsi          |  11 ++
 drivers/mfd/Kconfig                           |  11 ++
 drivers/mfd/simple-mfd-i2c.c                  |  30 ++--
 drivers/mfd/simple-mfd-i2c.h                  |   2 +-
 drivers/regulator/Kconfig                     |  12 ++
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/spacemit-p1.c               | 157 ++++++++++++++++
 drivers/rtc/Kconfig                           |  10 ++
 drivers/rtc/Makefile                          |   1 +
 drivers/rtc/rtc-spacemit-p1.c                 | 167 ++++++++++++++++++
 13 files changed, 620 insertions(+), 13 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
 create mode 100644 drivers/regulator/spacemit-p1.c
 create mode 100644 drivers/rtc/rtc-spacemit-p1.c


base-commit: 2aeda9592360c200085898a258c4754bfe879921
-- 
2.45.2




More information about the linux-riscv mailing list