[PATCH 1/8] dt-bindings: dma: marvell,mmp-dma: Add SpacemiT PDMA compatibility

Conor Dooley conor at kernel.org
Wed Jun 11 09:27:10 PDT 2025


On Wed, Jun 11, 2025 at 08:57:16PM +0800, Guodong Xu wrote:
> Add "spacemit,pdma-1.0" compatible string to support SpacemiT PDMA
> controller in the Marvell MMP DMA device tree bindings. This enables:
> 
> - Support for SpacemiT PDMA controller configuration
> - New optional properties for platform-specific integration:
>   * clocks: Clock controller for the DMA
>   * resets: Reset controller for the DMA
> 
> Also, add explicit #dma-cells property definition to avoid
> "make dtbs_check W=3" warnings about unevaluated properties.
> 
> The #dma-cells property is defined as 2 cells to maintain compatibility
> with existing ARM device trees. The first cell specifies the DMA request
> line number, while the second cell is currently unused by the driver but
> required for backward compatibility with PXA device tree files.
> 
> Signed-off-by: Guodong Xu <guodong at riscstar.com>
> ---
>  .../bindings/dma/marvell,mmp-dma.yaml           | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml
> index d447d5207be0..e117a81414bd 100644
> --- a/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml
> +++ b/Documentation/devicetree/bindings/dma/marvell,mmp-dma.yaml
> @@ -18,6 +18,7 @@ properties:
>        - marvell,pdma-1.0
>        - marvell,adma-1.0
>        - marvell,pxa910-squ
> +      - spacemit,pdma-1.0

You need a soc-specific compatible here.

>  
>    reg:
>      maxItems: 1
> @@ -32,6 +33,21 @@ properties:
>        A phandle to the SRAM pool
>      $ref: /schemas/types.yaml#/definitions/phandle
>  
> +  clocks:
> +    description: Clock for the controller
> +    maxItems: 1
> +
> +  resets:
> +    description: Reset controller for the DMA controller
> +    maxItems: 1
> +
> +  '#dma-cells':
> +    const: 2
> +    description:
> +      The first cell contains the DMA request number for the peripheral
> +      device. The second cell is currently unused but must be present for
> +      backward compatibility.

These properties are only valid for your new device, right?
If so, please restrict them to only the spacemit platform.

> +
>    '#dma-channels':
>      deprecated: true
>  
> @@ -52,6 +68,7 @@ allOf:
>            contains:
>              enum:
>                - marvell,pdma-1.0
> +              - spacemit,pdma-1.0
>      then:
>        properties:
>          asram: false
> -- 
> 2.43.0
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20250611/89c3d7d1/attachment.sig>


More information about the linux-riscv mailing list