[PATCH v1 1/2] riscv: dts: starfive: jh7110: pciephy0 USB 3.0 configuration registers

[Conor Dooley]

On Tue, Jan 14, 2025 at 05:42:28AM +0000, Minda Chen wrote:
> 
> 
> > 
> > On Thu, Jan 02, 2025 at 10:37:36AM -0800, E Shattow wrote:
> > > StarFive JH7110 contains a Cadence USB2.0+USB3.0 controller IP block
> > > that may exclusively use pciephy0 for USB3.0 connectivity. Add the
> > > register offsets for the driver to enable/disable USB3.0 on pciephy0.
> > >
> > > Signed-off-by: E Shattow <e at freeshell.de>
> > > ---
> > >  arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 ++
> > >  1 file changed, 2 insertions(+)
> > >
> > > diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > index 0d8339357bad..75ff07303e8b 100644
> > > --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> > > @@ -611,6 +611,8 @@ usbphy0: phy at 10200000 {
> > >  		pciephy0: phy at 10210000 {
> > >  			compatible = "starfive,jh7110-pcie-phy";
> > >  			reg = <0x0 0x10210000 0x0 0x10000>;
> > > +			starfive,sys-syscon = <&sys_syscon 0x18>;
> > > +			starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>;
> > 
> > Why weren't these added in the first place? Minda, do you know?
> > 
> The driver only require to set syscon register while the PHY attach to Cadence USB.(star64 board case)
> The PHY default attach to PCIe0, VF2 board do not set any setting. So I don't set it.

Does this mean that the change should be made in files where it will
only affect non-VF2 boards, or is it harmless if applied to the VF2
also?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20250114/271a67ec/attachment.sig>