[PATCH v7 1/4] dt-bindings: gpio: spacemit: add support for K1 SoC

[Rob Herring (Arm)]

On Wed, 26 Feb 2025 08:41:17 +0800, Yixun Lan wrote:
> The GPIO controller of K1 support basic functions as input/output,
> all pins can be used as interrupt which route to one IRQ line,
> trigger type can be select between rising edge, falling edge, or both.
> There are four GPIO banks, each consisting of 32 pins.
> 
> Reviewed-by: Linus Walleij <linus.walleij at linaro.org>
> Signed-off-by: Yixun Lan <dlan at gentoo.org>
> ---
>  .../devicetree/bindings/gpio/spacemit,k1-gpio.yaml | 79 ++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh at kernel.org>