[PATCH v2 1/2] riscv: dts: starfive: jh7110-common: increase mmc0 max-frequency

[Shengyu Qu]

Sry I forgot to cc actually.

在 2025/2/22 22:17, Shengyu Qu 写道:
> Hi,
> 
> Let's continue our discussion here.
> 
> Will EMMC speed increase if we only apply patch 1?
> 
> Also, about your clock-rates modification in patch 2, I CCed William Qiu
> so that we might get some more information about this.
> 
> Besides I've done a speed test with unlimitied clock-rates and an early
> state of SOC clock driver on visionfive 2 when I was working on AXP15060
> driver before: http://forum.rvspace.org/t/question-about-sd-card- 
> speed/1741/21
> 
> Best regards,
> Shengyu
> 
> 在 2025/2/22 21:34, Maud Spierings via B4 Relay 写道:
>> From: Maud Spierings <maud_spierings at hotmail.com>
>>
>> This sdio interface is capable of more than 100 MHz as already indicated
>> by the cap_hs200-1_8v attribute. Increase the max-frequency to 200 MHz
>> so users of this dtsi can increase their SDIO bus speed.
>>
>> Signed-off-by: Maud Spierings <maud_spierings at hotmail.com>
>> ---
>>   arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/ 
>> riscv/boot/dts/starfive/jh7110-common.dtsi
>> index 
>> dd2eefc295e5c8b568a02104ec2189e66b378904..19ca8dc24617c2ad565a4a9b2d9af9bd9491f22e 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
>> @@ -258,7 +258,7 @@ &i2c6 {
>>   };
>>   &mmc0 {
>> -    max-frequency = <100000000>;
>> +    max-frequency = <200000000>;
>>       assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
>>       assigned-clock-rates = <50000000>;
>>       bus-width = <8>;
>>
>