[PATCH 4/5] riscv: dts: allwinner: d1s-t113: Add D-PHY to TCON LCD0

[Kuba Szczodrzyński]

The sun4i TCON needs a reference to the D-PHY in order to support LVDS
on Allwinner D1s/T113.

Signed-off-by: Kuba Szczodrzyński <kuba at szczodrzynski.pl>
---
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index e4175adb0..d241ba306 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -828,6 +828,8 @@ tcon_lcd0: lcd-controller at 5461000 {
 			resets = <&ccu RST_BUS_TCON_LCD0>,
 				 <&ccu RST_BUS_LVDS0>;
 			reset-names = "lcd", "lvds";
+			phys = <&dphy>;
+			phy-names = "dphy";
 			#clock-cells = <0>;
 
 			ports {
-- 
2.25.1