[PATCH] riscv: dts: allwinner: d1: Add thermal sensor

[John Watts]

From: Maxim Kiselev <bigunclemax at gmail.com>

This patch adds a thermal sensor controller node for the D1/T113s.
Also it adds a THS calibration data cell to efuse node.

Signed-off-by: Maxim Kiselev <bigunclemax at gmail.com>
Reviewed-by: Andre Przywara <andre.przywara at arm.com>
Signed-off-by: John Watts <contact at jookia.org>
[John Watts: Remove disabled status]
---
This is a quick fixed version of Maxim Kiselev's patch from here:

https://lore.kernel.org/all/20231217210629.131486-4-bigunclemax@gmail.com/

It removes the disabled status as requested. I've tested it by adding thermal
zones to my board and it works from what I can see.
---
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index e4175adb028da2be539e7aa316206fec4810adfc..cc3f9cc9b8ed20121924cc932412a6b6342a2f86 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -166,6 +166,18 @@ gpadc: adc at 2009000 {
 			#io-channel-cells = <1>;
 		};
 
+		ths: thermal-sensor at 2009400 {
+			compatible = "allwinner,sun20i-d1-ths";
+			reg = <0x02009400 0x400>;
+			interrupts = <SOC_PERIPHERAL_IRQ(58) IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <0>;
+		};
+
 		dmic: dmic at 2031000 {
 			compatible = "allwinner,sun20i-d1-dmic",
 				     "allwinner,sun50i-h6-dmic";
@@ -426,6 +438,10 @@ sid: efuse at 3006000 {
 			reg = <0x3006000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			ths_calibration: thermal-sensor-calibration at 14 {
+				reg = <0x14 0x4>;
+			};
 		};
 
 		crypto: crypto at 3040000 {

---
base-commit: eca631b8fe808748d7585059c4307005ca5c5820
change-id: 20250220-thermal-803de9da0ce6

Best regards,
-- 
John Watts <contact at jookia.org>