[PATCH v1 2/2] riscv: dts: starfive: jh7110-pine64-star64: enable USB 3.0 port

[Emil Renner Berthing]

E Shattow wrote:
> One of four USB-A ports on the Pine64 Star64 is USB 3.0 which requires to
> disable PCIE0 and change the mode of PCIE0 PHY to USB3.0 operation. The
> remaining three USB-A ports are USB 2.0 with the USB0 PHY and do not
> conflict with any of PCIE0 or PCIE1. PCIE1 (1-lane) routes to a PCIe X4
> connector.
>
> Signed-off-by: E Shattow <e at freeshell.de>

Reviewed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

Thanks!

> ---
>  arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
> index b764d4d92fd9..31e825be2065 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
> +++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
> @@ -100,3 +100,8 @@ &usb0 {
>  	pinctrl-0 = <&usb0_pins>;
>  	status = "okay";
>  };
> +
> +&usb_cdns3 {
> +	phys = <&usbphy0>, <&pciephy0>;
> +	phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
> +};
> --
> 2.45.2
>