[PATCH v5 4/5] riscv: dts: spacemit: add gpio support for K1 SoC

[Yixun Lan]

Populate the GPIO node in the device tree for SpacemiT K1 SoC.
Each of 32 pins will act as one bank and map pins to pinctrl controller.

Signed-off-by: Yixun Lan <dlan at gentoo.org>
---
 arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi |  3 +++
 arch/riscv/boot/dts/spacemit/k1.dtsi         | 15 +++++++++++++++
 2 files changed, 18 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
index a8eac5517f8578d60cb45214589ccb45ac376b9a..283663647a86ff137917ced8bfe79a129c86342a 100644
--- a/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi
@@ -7,6 +7,9 @@
 
 #define K1_PADCONF(pin, func) (((pin) << 16) | (func))
 
+/* Map GPIO pin to each bank's <index, offset> */
+#define K1_GPIO(x)	(x / 32) (x % 32)
+
 &pinctrl {
 	uart0_2_cfg: uart0-2-cfg {
 		uart0-2-pins {
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index c670ebf8fa12917aa6493fcd89fdd1409529538b..d65ff76ead8cbe303412954c8abafbefecf8081e 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -404,6 +404,21 @@ uart9: serial at d4017800 {
 			status = "disabled";
 		};
 
+		gpio: gpio at d4019000 {
+			compatible = "spacemit,k1-gpio";
+			reg = <0x0 0xd4019000 0x0 0x100>;
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupts = <58>;
+			interrupt-parent = <&plic>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			gpio-ranges = <&pinctrl 0 0 32>,
+				      <&pinctrl 0 32 32>,
+				      <&pinctrl 0 64 32>,
+				      <&pinctrl 0 96 32>;
+		};
+
 		pinctrl: pinctrl at d401e000 {
 			compatible = "spacemit,k1-pinctrl";
 			reg = <0x0 0xd401e000 0x0 0x400>;

-- 
2.48.1