[PATCH v11 1/3] dt-bindings: rtc: sophgo: add RTC support for Sophgo CV1800 series SoC

[Inochi Amaoto]

On Thu, Feb 13, 2025 at 10:56:45PM +0100, Alexander Sverdlin wrote:
> From: Jingbao Qiu <qiujingbao.dlmu at gmail.com>
> 
> Add RTC devicetree binding for Sophgo CV1800 SoC.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> Signed-off-by: Jingbao Qiu <qiujingbao.dlmu at gmail.com>
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin at gmail.com>
> ---
>  .../bindings/rtc/sophgo,cv1800-rtc.yaml       | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/sophgo,cv1800-rtc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/rtc/sophgo,cv1800-rtc.yaml b/Documentation/devicetree/bindings/rtc/sophgo,cv1800-rtc.yaml
> new file mode 100644
> index 000000000000..b36b51a69166
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/rtc/sophgo,cv1800-rtc.yaml
> @@ -0,0 +1,53 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/rtc/sophgo,cv1800-rtc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Real Time Clock of the Sophgo CV1800 SoC
> +
> +description:
> +  Real Time Clock (RTC) is an independently powered module
> +  within the chip, which includes a 32KHz oscillator and a
> +  Power On Reset/POR submodule. It can be used for time display
> +  and timed alarm generation. In addition, the hardware state
> +  machine provides triggering and timing control for chip
> +  power on, off, and reset.
> +
> +maintainers:
> +  - Jingbao Qiu <qiujingbao.dlmu at gmail.com>
> +
> +allOf:
> +  - $ref: rtc.yaml#
> +

> +properties:
> +  compatible:
> +    const: sophgo,cv1800-rtc

Now I prefer cv1800b to cv1800, using wildcard to provide base
compatible is not a good idea. This old design should be changed.

Otherwise, it looks good to me. With the compatible change:

Reviewed-by: Inochi Amaoto <inochiama at gmail.com>

Regards,
Inochi