[PATCH v1] riscv: dts: starfive: remove non-existent dac from jh7110
Conor Dooley
conor at kernel.org
Thu Feb 13 12:03:52 PST 2025
From: Conor Dooley <conor.dooley at microchip.com>
The jh7110 boards do not have a Rohm DAC on them as far as I
can tell, and they certainly do not have a dh2228fv, as this device does
not actually exist! Remove the dac nodes from the devicetrees as it is
not acceptable to pretend to have a device on a board in order to bind
the spidev driver in Linux.
Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
---
CC: Emil Renner Berthing <kernel at esmil.dk>
CC: Conor Dooley <conor at kernel.org>
CC: Rob Herring <robh at kernel.org>
CC: Krzysztof Kozlowski <krzk+dt at kernel.org>
CC: linux-riscv at lists.infradead.org
CC: devicetree at vger.kernel.org
CC: linux-kernel at vger.kernel.org
---
arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 6 ------
1 file changed, 6 deletions(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index dd2eefc295e5..c2f70f5e2918 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -350,12 +350,6 @@ &pwm {
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
-
- spi_dev0: spi at 0 {
- compatible = "rohm,dh2228fv";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
};
&syscrg {
--
2.45.2
More information about the linux-riscv
mailing list