[PATCH v10 0/3] Add support for Allwinner PWM on D1/T113s/R329 SoCs

[Chris Morgan]

On Fri, Oct 11, 2024 at 01:27:31PM +0300, Aleksandr Shubin wrote:
> v2:
>  - fix dt-bindings
>  - fix a remark in the driver
> 
> v3:
>  - fix dt-bindings
>  - fix sunxi-d1s-t113.dtsi
> 
> v4:
>  - fix a remark in the driver
> 
> v5:
>  - dropped unused varibale in the driver
>  - fix dt-bindings
> 
> v6:
>  - add apb0 clock
> 
> v7:
>  - fix a remark in the driver
>  - add maintainer
> 
> v8:
>  - fix compile driver for 6.8-rc
> 
> v9:
>  - fix a remark in the driver
>  - fix dt-bindings
>  - rename apb0 -> apb
> 
> v10:
>  - fix a remark in the driver
>  - fix compile driver for 6.12-rc2
> 
> Aleksandr Shubin (3):
>   dt-bindings: pwm: Add binding for Allwinner D1/T113-S3/R329 PWM
>     controller
>   pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
>   riscv: dts: allwinner: d1: Add pwm node
> 
>  .../bindings/pwm/allwinner,sun20i-pwm.yaml    |  84 ++++
>  .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    |  12 +
>  drivers/pwm/Kconfig                           |  10 +
>  drivers/pwm/Makefile                          |   1 +
>  drivers/pwm/pwm-sun20i.c                      | 379 ++++++++++++++++++
>  5 files changed, 486 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/allwinner,sun20i-pwm.yaml
>  create mode 100644 drivers/pwm/pwm-sun20i.c
> 
> -- 
> 2.25.1
> 

This patch has been idle for a few months, would you mind if I took
over shepherding it to mainline? While I don't have *this* hardware
to test it with I have an H616 which has a similar pwm controller (and
for which I was going to add support for once this made it to
mainline). Otherwise, I can just wait patiently and then tack on my
additions once this has been accepted.

Thank you,
Chris