[PATCH v2] pinctrl: spacemit: enable config option

Alex Elder elder at riscstar.com
Wed Feb 12 05:50:17 PST 2025


On 2/12/25 2:27 AM, Yixun Lan wrote:
> Pinctrl is an essential driver for SpacemiT's SoC,
> so let's enable it by default for this SoC.
> 
> The CONFIG_PINCTRL_SPACEMIT_K1 isn't enabled when using
> 'make defconfig' to select kernel configuration options.
> This result in a broken uart driver where fail at probe()
> stage due to no pins found.
> 
> Fixes: a83c29e1d145 ("pinctrl: spacemit: add support for SpacemiT K1 SoC")
> Reported-by: Alex Elder <elder at kernel.org>
> Acked-by: Conor Dooley <conor.dooley at microchip.com>
> Tested-by: Alex Elder <elder at riscstar.com>
> Signed-off-by: Yixun Lan <dlan at gentoo.org>

I just tested this version of the patch.  By default
PINCTRL_SPACEMIT_K1 is "y".  But since it's tristate,
perhaps it should be default=m so it's not built in
for everyone.  Yixun I assume the K1 pinctrl driver
actually *works* as a kernel module.

Anyway, I suggest this change to be a module; Conor
should weigh in.  Either way is good for me, and I
have tested both.

Reviewed-by: Alex Elder <elder at riscstar.com>

> ---
> This should fix problem that CONFIG_PINCTRL_SPACEMIT_K1 is not enabled
> when using make defconfig, thus fail to initilize uart driver which requst
> pins during probe stage.
> ---
> Changes in v2:
> - set default as y
> - Link to v1: https://lore.kernel.org/r/20250207-k1-pinctrl-option-v1-1-e8a7e4d8404f@gentoo.org
> ---
>   arch/riscv/Kconfig.socs          | 1 +
>   drivers/pinctrl/spacemit/Kconfig | 1 +
>   2 files changed, 2 insertions(+)
> 
> diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> index 1916cf7ba450ec9958265de2ca41dc504d4d2f7c..17606940bb5239d0fdfc6b5aefb50eeb982d14aa 100644
> --- a/arch/riscv/Kconfig.socs
> +++ b/arch/riscv/Kconfig.socs
> @@ -26,6 +26,7 @@ config ARCH_SOPHGO
>   
>   config ARCH_SPACEMIT
>   	bool "SpacemiT SoCs"
> +	select PINCTRL
>   	help
>   	  This enables support for SpacemiT SoC platform hardware.
>   
> diff --git a/drivers/pinctrl/spacemit/Kconfig b/drivers/pinctrl/spacemit/Kconfig
> index 168f8a5ffbb952cbeae3e3401c11149558e0a84b..c18d879274e72df251e0bc82a308603ce23738bd 100644
> --- a/drivers/pinctrl/spacemit/Kconfig
> +++ b/drivers/pinctrl/spacemit/Kconfig
> @@ -7,6 +7,7 @@ config PINCTRL_SPACEMIT_K1
>   	tristate "SpacemiT K1 SoC Pinctrl driver"
>   	depends on ARCH_SPACEMIT || COMPILE_TEST
>   	depends on OF
> +	default y
>   	select GENERIC_PINCTRL_GROUPS
>   	select GENERIC_PINMUX_FUNCTIONS
>   	select GENERIC_PINCONF
> 
> ---
> base-commit: 2014c95afecee3e76ca4a56956a936e23283f05b
> change-id: 20250207-k1-pinctrl-option-de5bdfd6b42e
> 
> Best regards,




More information about the linux-riscv mailing list