[PATCH 03/10] arm64: dts: sophgo: Add initial SG2000 SoC device tree

[Krzysztof Kozlowski]

On 09/02/2025 23:06, Alexander Sverdlin wrote:
> Add initial device tree for the SG2000 SoC by SOPHGO (from ARM64 PoV).
> 
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin at gmail.com>
> ---
>  arch/arm64/boot/dts/sophgo/sg2000.dtsi | 79 ++++++++++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/sophgo/sg2000.dtsi
> 
> diff --git a/arch/arm64/boot/dts/sophgo/sg2000.dtsi b/arch/arm64/boot/dts/sophgo/sg2000.dtsi
> new file mode 100644
> index 000000000000..4e520486cbe5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sophgo/sg2000.dtsi
> @@ -0,0 +1,79 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +#define SOC_PERIPHERAL_IRQ(nr)		GIC_SPI (nr)
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <riscv/sophgo/cv18xx-periph.dtsi>
> +#include <riscv/sophgo/cv181x.dtsi>
> +
> +/ {
> +	#address-cells = <1>;
> +	#size-cells = <1>;
> +	compatible = "sophgo,sg2000";
> +	interrupt-parent = <&gic>;
> +
> +	memory at 80000000 {
> +		device_type = "memory";
> +		reg = <0x80000000 0x20000000>;	/* 512MiB */
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu at 0 {
> +			compatible = "arm,cortex-a53";
> +			device_type = "cpu";
> +			reg = <0>;
> +			i-cache-size = <32768>;
> +			d-cache-size = <32768>;
> +			next-level-cache = <&l2>;
> +		};
> +
> +		l2: l2-cache {
> +			compatible = "cache";
> +			cache-level= <2>;
> +			cache-size = <0x20000>;
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,cortex-a53-pmu";
> +		interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> +		always-on;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	gic: interrupt-controller at 1f01000 {

MMIO nodes are always in the soc.

> +		compatible = "arm,cortex-a15-gic";
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		reg = <0x01f01000 0x1000>,
> +		      <0x01f02000 0x2000>;
> +	};
> +
> +	soc {

Override by phandle/label instead of duplicating.

> +		ranges;
> +
> +		pinctrl: pinctrl at 3001000 {
> +			compatible = "sophgo,sg2000-pinctrl";
> +			reg = <0x03001000 0x1000>,
> +			      <0x05027000 0x1000>;
> +			reg-names = "sys", "rtc";
> +		};
> +	};
> +};
> +
> +
> +&clk {
> +	compatible = "sophgo,sg2000-clk";


That's discouraged practice. If you need to define compatible, it means
the block is not shared between designs and must not be in common DTSI.


Best regards,
Krzysztof