[PATCH 04/10] arm64: dts: sophgo: Add Duo Module 01

[Inochi Amaoto]

On Sun, Feb 09, 2025 at 11:06:29PM +0100, Alexander Sverdlin wrote:
> The Duo Module 01 is a compact module with integrated SG2000,
> WI-FI6/BTDM5.4, and eMMC.
> Add only support for UART and SDHCI.
> 
> Signed-off-by: Alexander Sverdlin <alexander.sverdlin at gmail.com>
> ---
>  .../sophgo/sg2000_milkv_duo_module_01.dtsi    | 84 +++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/sophgo/sg2000_milkv_duo_module_01.dtsi
> 
> diff --git a/arch/arm64/boot/dts/sophgo/sg2000_milkv_duo_module_01.dtsi b/arch/arm64/boot/dts/sophgo/sg2000_milkv_duo_module_01.dtsi
> new file mode 100644
> index 000000000000..7edcc4d03cc4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/sophgo/sg2000_milkv_duo_module_01.dtsi
> @@ -0,0 +1,84 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +
> +#include <dt-bindings/pinctrl/pinctrl-sg2000.h>
> +#include "sg2000.dtsi"
> +
> +/ {
> +	model = "Milk-V Duo Module 01";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial1 = &uart1;
> +		serial2 = &uart2;
> +		serial3 = &uart3;
> +		serial4 = &uart4;
> +	};
> +};
> +
> +&osc {
> +	clock-frequency = <25000000>;
> +};
> +
> +&emmc {

> +	/delete-property/ status;

Override it with status = "okay";
This suggestion applies to all you dts patch.

> +	bus-width = <4>;
> +	no-1-8-v;
> +	cap-mmc-hw-reset;
> +	no-sd;
> +	no-sdio;
> +	non-removable;
> +};
> +
> +/* Wi-Fi */
> +&sdhci1 {
> +	bus-width = <4>;
> +	cap-sdio-irq;
> +	no-mmc;
> +	no-sd;
> +	non-removable;
> +};
> +
> +&pinctrl {
> +	uart0_cfg: uart0-cfg {
> +		uart0-pins {
> +			pinmux = <PINMUX(PIN_UART0_TX, 0)>,
> +				 <PINMUX(PIN_UART0_RX, 0)>;
> +			bias-pull-up;
> +			drive-strength-microamp = <10800>;
> +			power-source = <3300>;
> +		};
> +	};
> +
> +	sdhci0_cfg: sdhci0-cfg {
> +		sdhci0-clk-pins {
> +			pinmux = <PINMUX(PIN_SD0_CLK, 0)>;
> +			bias-pull-up;
> +			drive-strength-microamp = <16100>;
> +			power-source = <3300>;
> +		};
> +
> +		sdhci0-cmd-pins {
> +			pinmux = <PINMUX(PIN_SD0_CMD, 0)>;
> +			bias-pull-up;
> +			drive-strength-microamp = <10800>;
> +			power-source = <3300>;
> +		};
> +
> +		sdhci0-data-pins {
> +			pinmux = <PINMUX(PIN_SD0_D0, 0)>,
> +				 <PINMUX(PIN_SD0_D1, 0)>,
> +				 <PINMUX(PIN_SD0_D2, 0)>,
> +				 <PINMUX(PIN_SD0_D3, 0)>;
> +			bias-pull-up;
> +			drive-strength-microamp = <10800>;
> +			power-source = <3300>;
> +		};
> +
> +		sdhci0-cd-pins {
> +			pinmux = <PINMUX(PIN_SD0_CD, 0)>;
> +			bias-pull-up;
> +			drive-strength-microamp = <10800>;
> +			power-source = <3300>;
> +		};
> +	};
> +};
> -- 
> 2.48.1
>