[PATCH 3/4] riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC

[Chen Wang]

On 2025/2/9 20:29, Inochi Amaoto wrote:
> Add reset generator node for all CV18XX series SoC.
>
> Signed-off-by: Inochi Amaoto <inochiama at gmail.com>
> ---
>   arch/riscv/boot/dts/sophgo/cv18xx-reset.h | 98 +++++++++++++++++++++++

Why it's not include/dt-bindings/reset/sophgo,cv18xx-reset.h?

Regards,

Chen

>   arch/riscv/boot/dts/sophgo/cv18xx.dtsi    |  7 ++
>   2 files changed, 105 insertions(+)
>   create mode 100644 arch/riscv/boot/dts/sophgo/cv18xx-reset.h
>
> diff --git a/arch/riscv/boot/dts/sophgo/cv18xx-reset.h b/arch/riscv/boot/dts/sophgo/cv18xx-reset.h
> new file mode 100644
> index 000000000000..3d9aa9ec7e90
> --- /dev/null
> +++ b/arch/riscv/boot/dts/sophgo/cv18xx-reset.h
> @@ -0,0 +1,98 @@
> +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
> +/*
> + * Copyright (C) 2025 Inochi Amaoto <inochiama at outlook.com>
> + */
> +
> +#ifndef _SOPHGO_CV18XX_RESET
> +#define _SOPHGO_CV18XX_RESET
> +
> +#define RST_DDR				2
> +#define RST_H264C			3
> +#define RST_JPEG			4
> +#define RST_H265C			5
> +#define RST_VIPSYS			6
> +#define RST_TDMA			7
> +#define RST_TPU				8
> +#define RST_TPUSYS			9
> +#define RST_USB				11
> +#define RST_ETH0			12
> +#define RST_ETH1			13
> +#define RST_NAND			14
> +#define RST_EMMC			15
> +#define RST_SD0				16
> +#define RST_SDMA			18
> +#define RST_I2S0			19
> +#define RST_I2S1			20
> +#define RST_I2S2			21
> +#define RST_I2S3			22
> +#define RST_UART0			23
> +#define RST_UART1			24
> +#define RST_UART2			25
> +#define RST_UART3			26
> +#define RST_I2C0			27
> +#define RST_I2C1			28
> +#define RST_I2C2			29
> +#define RST_I2C3			30
> +#define RST_I2C4			31
> +#define RST_PWM0			32
> +#define RST_PWM1			33
> +#define RST_PWM2			34
> +#define RST_PWM3			35
> +#define RST_SPI0			40
> +#define RST_SPI1			41
> +#define RST_SPI2			42
> +#define RST_SPI3			43
> +#define RST_GPIO0			44
> +#define RST_GPIO1			45
> +#define RST_GPIO2			46
> +#define RST_EFUSE			47
> +#define RST_WDT				48
> +#define RST_AHB_ROM			49
> +#define RST_SPIC			50
> +#define RST_TEMPSEN			51
> +#define RST_SARADC			52
> +#define RST_COMBO_PHY0			58
> +#define RST_SPI_NAND			61
> +#define RST_SE				62
> +#define RST_UART4			74
> +#define RST_GPIO3			75
> +#define RST_SYSTEM			76
> +#define RST_TIMER			77
> +#define RST_TIMER0			78
> +#define RST_TIMER1			79
> +#define RST_TIMER2			80
> +#define RST_TIMER3			81
> +#define RST_TIMER4			82
> +#define RST_TIMER5			83
> +#define RST_TIMER6			84
> +#define RST_TIMER7			85
> +#define RST_WGN0			86
> +#define RST_WGN1			87
> +#define RST_WGN2			88
> +#define RST_KEYSCAN			89
> +#define RST_AUDDAC			91
> +#define RST_AUDDAC_APB			92
> +#define RST_AUDADC			93
> +#define RST_VCSYS			95
> +#define RST_ETHPHY			96
> +#define RST_ETHPHY_APB			97
> +#define RST_AUDSRC			98
> +#define RST_VIP_CAM0			99
> +#define RST_WDT1			100
> +#define RST_WDT2			101
> +#define RST_AUTOCLEAR_CPUCORE0		128
> +#define RST_AUTOCLEAR_CPUCORE1		129
> +#define RST_AUTOCLEAR_CPUCORE2		130
> +#define RST_AUTOCLEAR_CPUCORE3		131
> +#define RST_AUTOCLEAR_CPUSYS0		132
> +#define RST_AUTOCLEAR_CPUSYS1		133
> +#define RST_AUTOCLEAR_CPUSYS2		134
> +#define RST_CPUCORE0			160
> +#define RST_CPUCORE1			161
> +#define RST_CPUCORE2			162
> +#define RST_CPUCORE3			163
> +#define RST_CPUSYS0			164
> +#define RST_CPUSYS1			165
> +#define RST_CPUSYS2			166
> +
> +#endif /* _SOPHGO_CV18XX_RESET */
> diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> index c18822ec849f..9aa28ade73a4 100644
> --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
> @@ -7,6 +7,7 @@
>   #include <dt-bindings/clock/sophgo,cv1800.h>
>   #include <dt-bindings/gpio/gpio.h>
>   #include <dt-bindings/interrupt-controller/irq.h>
> +#include "cv18xx-reset.h"
>   
>   / {
>   	#address-cells = <1>;
> @@ -61,6 +62,12 @@ clk: clock-controller at 3002000 {
>   			#clock-cells = <1>;
>   		};
>   
> +		rst: reset-controller at 3003000 {
> +			compatible = "sophgo,cv1800b-reset";
> +			reg = <0x3003000 0x1000>;
> +			#reset-cells = <1>;
> +		};
> +
>   		gpio0: gpio at 3020000 {
>   			compatible = "snps,dw-apb-gpio";
>   			reg = <0x3020000 0x1000>;