[PATCH 18/19] iommu: Update various drivers to pass in lg2sz instead of order to iommu pages
Robin Murphy
robin.murphy at arm.com
Wed Feb 5 07:47:03 PST 2025
On 2025-02-04 6:34 pm, Jason Gunthorpe wrote:
> Convert most of the places calling get_order() as an argument to the
> iommu-pages allocator into order_base_2() or the _sz flavour
> instead. These places already have an exact size, there is no particular
> reason to use order here.
>
> Signed-off-by: Jason Gunthorpe <jgg at nvidia.com>
> ---
[...]
> @@ -826,7 +825,7 @@ void *__init iommu_alloc_4k_pages(struct amd_iommu *iommu, gfp_t gfp,
> size_t size)
> {
> int order = get_order(size);
> - void *buf = iommu_alloc_pages(gfp, order);
> + void *buf = iommu_alloc_pages_lg2(gfp, order + PAGE_SHIFT);
This is a size, really - it's right there above.
(although alloc_cwwb_sem() passing 1 looks highly suspicious - judging
by other cmd_sem references that probably should be PAGE_SIZE...)
Furthermore even the set_memory_4k() call doesn't really want an order
either, PAGE_ALIGN(size) >> PAGE_SHIFT would do.
>
> if (buf &&
> check_feature(FEATURE_SNP) &&
[...]
> @@ -1702,8 +1701,10 @@ int dmar_enable_qi(struct intel_iommu *iommu)
> * Need two pages to accommodate 256 descriptors of 256 bits each
> * if the remapping hardware supports scalable mode translation.
> */
> - order = ecap_smts(iommu->ecap) ? 1 : 0;
> - desc = iommu_alloc_pages_node(iommu->node, GFP_ATOMIC, order);
> + desc = iommu_alloc_pages_node_lg2(iommu->node, GFP_ATOMIC,
> + ecap_smts(iommu->ecap) ?
> + order_base_2(SZ_8K) :
> + order_base_2(SZ_4K));
These are also clearly sizes.
> if (!desc) {
> kfree(qi);
> iommu->qi = NULL;
> diff --git a/drivers/iommu/io-pgtable-arm.c b/drivers/iommu/io-pgtable-arm.c
> index 8727d8e1e02f45..0e1dd519c3b9b3 100644
> --- a/drivers/iommu/io-pgtable-arm.c
> +++ b/drivers/iommu/io-pgtable-arm.c
> @@ -263,14 +263,14 @@ static void *__arm_lpae_alloc_pages(size_t size, gfp_t gfp,
> void *cookie)
> {
> struct device *dev = cfg->iommu_dev;
> - int order = get_order(size);
> dma_addr_t dma;
> void *pages;
>
> if (cfg->alloc)
> pages = cfg->alloc(cookie, size, gfp);
> else
> - pages = iommu_alloc_pages_node(dev_to_node(dev), gfp, order);
> + pages = iommu_alloc_pages_node_lg2(dev_to_node(dev), gfp,
> + order_base_2(size));
Another size. Same thing in patch #17 too. I don't see any need to have
the log2 stuff at all, I think we just switch iommu_alloc_pages{_node}()
to take a size and keep things simple.
Thanks,
Robin.
>
> if (!pages)
> return NULL;
> diff --git a/drivers/iommu/io-pgtable-dart.c b/drivers/iommu/io-pgtable-dart.c
> index a4cbd8a8a2976e..3b57d14baa9c1d 100644
> --- a/drivers/iommu/io-pgtable-dart.c
> +++ b/drivers/iommu/io-pgtable-dart.c
> @@ -107,13 +107,6 @@ static phys_addr_t iopte_to_paddr(dart_iopte pte,
> return paddr;
> }
>
> -static void *__dart_alloc_pages(size_t size, gfp_t gfp)
> -{
> - int order = get_order(size);
> -
> - return iommu_alloc_pages(gfp, order);
> -}
> -
> static int dart_init_pte(struct dart_io_pgtable *data,
> unsigned long iova, phys_addr_t paddr,
> dart_iopte prot, int num_entries,
> @@ -255,7 +248,7 @@ static int dart_map_pages(struct io_pgtable_ops *ops, unsigned long iova,
>
> /* no L2 table present */
> if (!pte) {
> - cptep = __dart_alloc_pages(tblsz, gfp);
> + cptep = iommu_alloc_pages_sz(gfp, tblsz);
> if (!cptep)
> return -ENOMEM;
>
> @@ -412,7 +405,8 @@ apple_dart_alloc_pgtable(struct io_pgtable_cfg *cfg, void *cookie)
> cfg->apple_dart_cfg.n_ttbrs = 1 << data->tbl_bits;
>
> for (i = 0; i < cfg->apple_dart_cfg.n_ttbrs; ++i) {
> - data->pgd[i] = __dart_alloc_pages(DART_GRANULE(data), GFP_KERNEL);
> + data->pgd[i] =
> + iommu_alloc_pages_sz(GFP_KERNEL, DART_GRANULE(data));
> if (!data->pgd[i])
> goto out_free_data;
> cfg->apple_dart_cfg.ttbr[i] = virt_to_phys(data->pgd[i]);
> diff --git a/drivers/iommu/sun50i-iommu.c b/drivers/iommu/sun50i-iommu.c
> index 3d77aed8507373..d0e515bf5dd1f6 100644
> --- a/drivers/iommu/sun50i-iommu.c
> +++ b/drivers/iommu/sun50i-iommu.c
> @@ -690,8 +690,8 @@ sun50i_iommu_domain_alloc_paging(struct device *dev)
> if (!sun50i_domain)
> return NULL;
>
> - sun50i_domain->dt = iommu_alloc_pages(GFP_KERNEL | GFP_DMA32,
> - get_order(DT_SIZE));
> + sun50i_domain->dt =
> + iommu_alloc_pages_sz(GFP_KERNEL | GFP_DMA32, DT_SIZE);
> if (!sun50i_domain->dt)
> goto err_free_domain;
>
More information about the linux-riscv
mailing list