[PATCH v2 2/5] riscv: dts: starfive: jh7110-common: qspi flash setting read-delay 2 cycles max 100MHz

[E Shattow]

Sync qspi flash setting to read-delay=2 and spi-max-frequency 100MHz for
better compatibility with operating system and downstream boot loader SPL
secondary program loader.

Signed-off-by: E Shattow <e at freeshell.de>
Reviewed-by: Hal Feng <hal.feng at starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index a5661b677687..8a59c3001339 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -317,8 +317,8 @@ &qspi {
 	nor_flash: flash at 0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
-		cdns,read-delay = <5>;
-		spi-max-frequency = <12000000>;
+		cdns,read-delay = <2>;
+		spi-max-frequency = <100000000>;
 		cdns,tshsl-ns = <1>;
 		cdns,tsd2d-ns = <1>;
 		cdns,tchsh-ns = <1>;
-- 
2.47.2