[PATCH v2 3/3] reset: spacemit: fix auxiliary device id

[Alex Elder]

On 12/26/25 12:55 AM, Yixun Lan wrote:
> Due to the auxiliary register procedure moved to ccu common module,
> the auxiliary device id need to be adjusted, otherwise reset driver
> will fail to probe.
> 
> Signed-off-by: Yixun Lan <dlan at gentoo.org>
> ---
>   drivers/reset/reset-spacemit.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/reset/reset-spacemit.c b/drivers/reset/reset-spacemit.c
> index e1272aff28f7..8922e14fa836 100644
> --- a/drivers/reset/reset-spacemit.c
> +++ b/drivers/reset/reset-spacemit.c
> @@ -278,7 +278,7 @@ static int spacemit_reset_probe(struct auxiliary_device *adev,
>   
>   #define K1_AUX_DEV_ID(_unit) \
>   	{ \
> -		.name = "spacemit_ccu_k1." #_unit "-reset", \
> +		.name = "spacemit_ccu." _K_RST(_unit), \
>   		.driver_data = (kernel_ulong_t)&k1_ ## _unit ## _reset_data, \
>   	}

The above macro is named K1_AUX_DEV_ID().  Why don't you
define K3_AUX_DEV_ID(), which could use "k3" in its name?

Anyway, if you go this route I suggest you drop "K1_" from the
name of this macro.

					-Alex

>   
>