[PATCH v4 7/9] riscv: dts: thead: lichee-pi-4a: enable HDMI

[Icenowy Zheng]

Lichee Pi 4A board features a HDMI Type-A connector connected to the
HDMI TX controller of TH1520 SoC.

Add a device tree node describing the connector, connect it to the HDMI
controller, and enable everything on this display pipeline.

Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda at iscas.ac.cn>
---
Changes in v4:
- Rebased on top of v6.19-rc1.

No changes in v2, v3.

 .../boot/dts/thead/th1520-lichee-pi-4a.dts    | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
index c58c2085ca92a..7cb7d28683bce 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -29,6 +29,17 @@ chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	thermal-zones {
 		cpu-thermal {
 			polling-delay = <1000>;
@@ -121,6 +132,20 @@ rx-pins {
 	};
 };
 
+&dpu {
+	status = "okay";
+};
+
+&hdmi {
+	status = "okay";
+};
+
+&hdmi_out_port {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins>;
-- 
2.52.0