[PATCH v7 0/5] Introduce SpacemiT K1 PCIe phy support

[Alex Elder]

On 12/18/25 9:12 AM, Alex Elder wrote:
> This series introduces a PHY driver to support PCIe on the SpacemiT K1
> SoC.  The PCIe controller implementation is derived from a Synopsys
> DesignWare PCIe IP.  The PHY driver supports one combination PCIe/USB
> PHY as well as two PCIe-only PHYs.  The combo PHY port uses one PCIe
> lane, and the other two ports each have two lanes.  All PCIe ports
> operate at 5 GT/second.
> 
> The PCIe PHYs must be configured using a value that can only be
> determined using the combo PHY, operating in PCIe mode.  To allow
> that PHY to be used for USB, the needed calibration step is performed
> by the PHY driver automatically at probe time.  Once this step is done,
> the PHY can be used for either PCIe or USB.
> 
> The PCIe controller driver that was included in earlier versions of
> this series has already been accepted upstream:
>    a812b09a6b599 ("dt-bindings: pci: spacemit: Introduce PCIe host
> 		  controller")
>    ff64e078e45fa ("PCI: spacemit: Add SpacemiT PCIe host driver")
> However this series still includes devicetree patches to enable the
> PCIe controller (along with the PHYs).
> 
> The patches that remain in version 7 of this series are unchanged;
> they are simply rebased on top of Linux v6.19-rc1.  The first two
> patches are the DT bindings for the PCIe and combo PCIe/USB PHY.
> The third is the PHY driver, and the last two are devicetree updates
> to enable the PCIe controller and PHYs.
> 
> 					-Alex

Yixun pointed out that I neglected to provide a summary of the
change history in this message.  Here is a link to version 6,
which summarizes prior history.  My explanation for v7 indicates
what changed since v6.
  
https://lore.kernel.org/lkml/20251113214540.2623070-1-elder@riscstar.com/

He also said I neglected to add Neil's Reviewed-by tag, which
is true.  That is here:
  
https://lore.kernel.org/all/ba532f8d-a452-40e5-af46-b58b89f70a92@linaro.org/

Sorry about that.  If requested, I can send an otherwise
unchanged version 8, but for now I'll assume that's not
necessary.

					-Alex

> Alex Elder (5):
>    dt-bindings: phy: spacemit: Add SpacemiT PCIe/combo PHY
>    dt-bindings: phy: spacemit: Introduce PCIe PHY
>    phy: spacemit: Introduce PCIe/combo PHY
>    riscv: dts: spacemit: Add a PCIe regulator
>    riscv: dts: spacemit: PCIe and PHY-related updates
> 
>   .../bindings/phy/spacemit,k1-combo-phy.yaml   | 114 +++
>   .../bindings/phy/spacemit,k1-pcie-phy.yaml    |  71 ++
>   .../boot/dts/spacemit/k1-bananapi-f3.dts      |  44 ++
>   arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi  |  33 +
>   arch/riscv/boot/dts/spacemit/k1.dtsi          | 176 +++++
>   drivers/phy/Kconfig                           |  11 +
>   drivers/phy/Makefile                          |   1 +
>   drivers/phy/phy-spacemit-k1-pcie.c            | 670 ++++++++++++++++++
>   8 files changed, 1120 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/phy/spacemit,k1-combo-phy.yaml
>   create mode 100644 Documentation/devicetree/bindings/phy/spacemit,k1-pcie-phy.yaml
>   create mode 100644 drivers/phy/phy-spacemit-k1-pcie.c
> 
> 
> base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8