[PATCH v2 3/3] riscv: dts: spacemit: Add thermal sensor for K1 SoC

[Shuwei Wu]

Include the Thermal Sensor node in the SpacemiT K1 dtsi
with definitions for registers, clocks, and interrupts.
Additionally, configure thermal zones for the soc, package, gpu, and
clusters to enable temperature monitoring via the thermal framework.

Signed-off-by: Shuwei Wu <shuweiwoo at 163.com>
---
Changes in v2:
- Update compatible to "spacemit,k1-tsensor"
---
 arch/riscv/boot/dts/spacemit/k1.dtsi | 101 +++++++++++++++++++++++++++++++++++
 1 file changed, 101 insertions(+)

diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index 7818ca4979b6a7755722919a5958512aa11950ab..0fe7396ea6e47d10a73e3bcea4f5165e5c268da0 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -338,6 +338,96 @@ osc_32k: clock-32k {
 		};
 	};
 
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				soc-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		package-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+
+			trips {
+				package-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+
+			trips {
+				gpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster0-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+
+			trips {
+				cluster0-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster0-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		cluster1-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+
+			trips {
+				cluster1-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cluster1-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -434,6 +524,17 @@ syscon_apbc: system-controller at d4015000 {
 			#reset-cells = <1>;
 		};
 
+		thermal: thermal at d4018000 {
+			compatible = "spacemit,k1-tsensor";
+			reg = <0x0 0xd4018000 0x0 0x100>;
+			clocks = <&syscon_apbc CLK_TSEN>,
+				 <&syscon_apbc CLK_TSEN_BUS>;
+			clock-names = "core", "bus";
+			interrupts = <61>;
+			resets = <&syscon_apbc RESET_TSEN>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		i2c6: i2c at d4018800 {
 			compatible = "spacemit,k1-i2c";
 			reg = <0x0 0xd4018800 0x0 0x38>;

-- 
2.52.0